Use and Care Guide

interceramic.com
GLAZED FLOOR TILE
Care and Maintenance
Routine maintenance of glazed and unglazed floor tile consists of simply sweeping and damp mopping with clean water and a mild solution
of neutral cleaner formulated for glazed tile. Areas exposed to heavy traffic can be cleaned with solution of a heavy-duty neutral cleaner
formulated for glazed tile and may also require scrubbing, depending on the texture of the surface. It is very important to change the mop
water frequently approximately every 100-500 square feet depending on how soiled the surface is. Please contact your sales representative
for recommendations on the type of cleaner best suited for your application.
GLAZED WALL TILE
Routine maintenance of glazed wall tile usually consists of simply wiping with a damp cloth or sponge. The use of a neutral cleaner
formulated for glazed tile is acceptable as long as any residue is removed with clean water rinse. Countertop applications will require more
frequent cleaning in this same manner depending on the exposure to grease, foods, acids, etc. Sealing grout joints on countertops is always
recommended to prevent staining. Shower applications will require more periodic cleaning in order to remove soap scum, body oils and
hard water deposit build up. Normally shower areas may be cleaned by spraying a mild solution of neutral cleaner formulated for glazed tile,
letting it stand for three to five minutes, and then rinsing. If the tiles area has been neglected for an extended period of time, a solution of a
heavy-duty neutral cleaner formulated for glazed tile is recommended for cleaning.
UNGLAZED FLOOR TILE
Unglazed mosaic, porcelain or quarry floor tile should be maintained by dust sweeping and damp mopping with clean water and a mild
solution of neutral cleaner formulated for tile. Areas exposed to heavy traffic can be cleaned with a solution of a heavy-duty neutral cleaner
formulated for tile and may also require scrubbing, depending the texture of the surface. An unglazed quarry tile floor ages, a patina forms on
the surface which gives it a soft shine and keeps the floor looking fresh longer.
SEALERS
Refer to the manufacturer’s recommendations before sealing unglazed mosaics, porcelain and quarry tile. There is no need to seal glazed
ceramic tile. However, sealing the grout joints is recommended unless an epoxy grout is used. Please contact your sales representative for
recommendations on the type of grout sealer best suited for your installation.
GLASS WALL TILE
For maintenance and cleaning, it is recommended to use a soft, clean cloth with warm water or with a non-abrasive cleaner formulated for
use with glass. Do not use any cleaners with abrasive agents as these could scratch the tile surface. Glass tile should not be installed in floor
applications because it can fracture when exposed to extreme weights and is very susceptible to scratching.