Installation Guide

6
INSTALLATION INSTRUCTIONS
Before installing, carefully unpack the
faucet and ensure no parts are missing.
3a. Insert the sprayer housing support through
the pre-drilled hole in the sink corner. Screw the
nut onto the threads and hand tighten.
3b. Run the sprayer hose down through the
sprayer housing and up through the center faucet
mounting hole. Connect the spray hose to the
quick connection of faucet just by a simple push.
3c. Install the faucet in the sink with hot water
handle (marked with an H or red indicator) on the
left and cold water handle (marked with a C or blue
indicator) on the right. From under the sink, thread
mounting nuts and rubber gaskets onto the faucet
shanks and tighten the mounting nuts.
3d. Connect the water supply lines (not supplied) to
the faucet.
Sprayer and hose
Faucet
Faucet shank
Mounting nut
Sprayer housing support
Nut
Water Supply Lines
Step 3: Faucet and Sprayer Installation
3