Installation Guide

8
FLOATING INSTALLATION INSTRUCTIONS
7. Repeat steps 5-6 to install remaining planks in
remaining rows.
Note: Whenever practical, use cut pieces from
previous rows as a starter plank to reduce waste.
Maintain 6 in. spacing between end joints after the
rst four rows for best appearance.
6. Install the second plank of the second row by
rst interlocking the end followed by the side.
Slightly angle the edge to properly engage the
tongue and groove then push down. A slight
tap with a tapping block may be necessary to
complete the interlock.
3
2
1
6
7
8 in. minimum
end joint stagger
8 in. minimum
end joint stagger