Installation Guide

Lowes.com

ASSEMBLY INSTRUCTIONS

1. Insert wood dowels (AA) into bottom frame (A).

Line up holes on one bottom side panel (D) with

wood dowels (AA) and attach to bottom frame

(A) using short cross bolts (BB), spring washers

(EE) and flat washers (FF). Tighten with Phillips

screwdriver (not included), but do not overtighten.

Repeat for the other bottom side panel (D), left

middle panel (B) and right middle panel (C), making

sure the nished side is facing forward.

2. Insert wood dowel (AA) into hole on left middle

panel (B) and right middle panel (C). Then, attach

front molding (E) to left middle panel (B) and right

middle panel (C) with long screws (HH). Tighten with

Phillips screwdriver.

Hardware Used

Wood Dowel

Long Screw

Spring Washer

Short Cross Bolt

Flat Washer

x 8

x 2

x 8

Note:

Do not fully tighten the bolts on the assembly until mantel is completed. Assemble the item as

close to its nal location as possible.