Installation Guide

10
Lowes.com
ASSEMBLY INSTRUCTIONS
19. Insert small blocks (not included) between the
rear panel braces and the back panel braces.
These will apply pressure to the back panel to
hold it in place. Remove the braces after 24
hours.
19
CARE AND MAINTENANCE
Wipe the surface with a damp cloth or sponge. For basic stains, clean with mild detergent or general
purpose cleaner. For cleaning corners and seams, spray with mildew cleaner. With regular
maintenance spraying there should be no need to scrub any silicone caulk joints.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Panels not sticking
to wall.
1. Surfaces not properly prepared for
silicone adhesive/sealant.
2. Wall surface not at for proper
adhesion.
1. Clean surface thoroughly and
reapply adhesive.
2. Use wood bracing support to
form panel to wall surface.
Panels not tting
properly.
1. Existing wall surfaces out of plumb.
2. Improper trimming of wall panels.
3. Panel cut too small (less than 1/2 in.).
1. Scribe panels to t.
2. Reorder miscut panel.
3. Order optional cove molding