Installation Guide

ManualsBrandsStyle Selections ManualsBathroom & Wall LightingDunwynn 2-Light Nickel Modern/Contemporary Vanity Light

ITEM #0970867

MODEL #VBL14-18CH

VANITY LIGHT

JW1818

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

Purchase Date

ATTACH YOUR RECEIPT HERE

welcoming • sophisticated • inspiring

allen + roth

is a registered trademark

Français p. 9

Español p. 17

APPROVED FOR USE

IN DAMP LOCATIONS

800053

Summary of content (8 pages)

PAGE 1
welcoming • sophisticated • inspiring 800053 APPROVED FOR USE IN DAMP LOCATIONS allen + roth® is a registered trademark of LF, LLC. All Rights Reserved. ITEM #0970867 VANITY LIGHT MODEL #VBL14-18CH Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
PAGE 2
PACKAGE CONTENTS PART A B C D DESCRIPTION QUANTITY Fixture Mounting Plate Screw (preassembled to fixture (A)) Mounting Plate (preassembled to fixture (A)) Glass Shade 1 2 A B 1 2 C D HARDWARE CONTENTS (shown actual size) AA BB Wire Connector Qty. 3 Machine Screw Qty. 2 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS.
PAGE 3
SAFETY INFORMATION • DO NOT connect the bare or green insulation fixture ground wire to the black (HOT) current-carrying wire or the white (NEUTRAL) house wire. Connection of the bare or green fixture ground wire to the black or white house wires may cause metal parts of the fixture to carry electrical currents. Under this condition anyone coming in contact with the fixture will receive electrical shock, which could cause serious injury or death.
PAGE 4
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
PAGE 5
ASSEMBLY INSTRUCTIONS 3. Remove mounting plate (C) from fixture (A) by removing mounting plate screws (B) from the fixture (A). 3 B Save mounting plate screws (B) for later use. C A B 4. Attach mounting plate (C) to outlet box (not included) using existing washers and outlet box screws or the machine screws (BB). NOTE: If the outlet box screws required for your outlet box are of a different size than the machine screws (BB), consult a licensed electrician before proceeding.
PAGE 6
ASSEMBLY INSTRUCTIONS 5. Prepare wires by stripping 3/4 in. of insulation from wire ends using wire strippers (not included). Connect WHITE wire from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect BLACK wire from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA). Connect BARE/GREEN ground wire from outlet box to BARE ground wire from fixture (A) with wire connector (AA).
PAGE 7
ASSEMBLY INSTRUCTIONS 7. Attach fixture (A) to mounting plate (C) using the mounting plate screws (B) previously removed (Step 3, Page 5). 7 B C NOTE: Before tightening mounting plate screws (B) completely, use level (not included) to check fixture (A) -- adjust if necessary. A Outlet Box B 8. Attach glass shades (D) to fixture (A). 8 WARNING: Make sure to tighten glass shades (D) completely. D D A 9. Restore power and test fixture (A).
PAGE 8
CARE AND MAINTENANCE • Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive cleaner. TROUBLESHOOTING WARNING: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Light does not come on initially or no longer comes on. 1. Power is OFF. 2. Faulty connection. 3. LED component is not working properly. 1. Make sure power supply is ON. 2. Check wiring and all connections. 3. Contact Customer Service.