005350172/312727388/23WM90535-PC78 1005207007/312727390/23WM90535-PB01 1005210977/312727262/23WM90535-PT01 USE AND CARE GUIDE WHEATON ELECTRIC FIREPLACE Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this Electric Fireplace.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. • It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA CC BB DD EE GG FF HH Part Description Part Number Quantity AA Cam Lock Screw PH-KDBZNC001 25 BB Cam Lock Connector PH-KDCZNC001 25 CC Wood Dowel PH-DWLNTL001 22 DD Screw- 3.5 x 12 mm PH-SCRBLK013 4 EE Screw- 3 x 12 mm PH-SCRBLK007 4 FF Tipping Restraint Hardware PH-BKTWHT003 1 GG Floor Glide (Pre-attached) PH_GLDBRW001 4 HH Metal Plate (Pre-attached) PH-PLTBLK001 4 NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. G F C E B I D A H Part A B C D E F G H I Description Bottom Shelf Left Side Panel Right Side Panel Left Surround Panel Right Surround Panel Top Surround Panel Top Panel Base Front Rail Fireplace Insert Quantity 1 1 1 1 1 1 1 1 1 7 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Assembly 1 Preparing the sides for assembly CC Locate the Left Side Panel (B) and the Right Side Panel (C). Insert the Wood Dowels (CC) into the pre-drilled holes on the edges of the Left and Right Side Panels (B, C). Insert the Cam Lock Screws (AA) into the pre-drilled holes on Left and Right Side Panels (B, C) where indicated. Tighten using a Phillips screwdriver. AA B C 2 Preparing the bottom shelf for assembly Locate the Bottom Shelf (A).
Assembly (continued) 4 Preparing the side surround panels Locate the Left Surround Panel (D) and Right Surround Panel (E) and place on a flat surface. Insert Cam Lock Screws (AA) into the pre-drilled holes in each panel and tighten with a Phillips screwdriver. AA E D 5 Preparing the top surround panel Locate the Top Surround Panel (F). Insert the Wood Dowels (CC) into the pre-drilled holes on the edges of the Top Surround Panel (F).
Assembly (continued) 7 Preparing base for assembly Locate the Base Front Rail (H). Place the Base Front Rail (H) on a flat surface and insert Cam Lock Screws (AA) as shown. AA H 8 BB Attaching the base to the surround Align the pre-drilled holes of the assembled surround panels from step 6 (D, E, F) with the cam lock screws on the edge of the Base Front Rail (H). Secure the Base Front Rail (H) to the surround panel assembly (D, E, F) with the Cam Lock Connectors (BB).
Assembly (continued) 10 Preparing the top assembly Locate the Top Panel (G) and place onto a flat surface. Insert the Cam Lock Screws (AA) into the pre-drilled holes in the bottom of the Top Panel (G). Tighten the Cam Lock Screws (AA) using a Phillips Screwdriver. AA G 11 Attaching the top Place the Top Panel (G) onto the main assembly by aligning the previously installed cam lock screws and wood dowels with the pre-drilled holes.
Assembly (continued) 12 Installing the fireplace insert Lift the Fireplace Insert (I) carefully into the back of the unit and center in the fireplace insert opening. Do not drag the fireplace insert across the base as it may scratch your unit. I 13 Securing the fireplace insert Use Screws (DD) to secure each side of the Fireplace Insert (I) firmly in place.
Assembly (continued) 14 Installing the tipping restraint hardware When the Tipping Restraint Hardware (FF) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing. Each Tipping Restraint Hardware (FF) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the flame There are 5 brightness levels that can be selected and OFF (00) setting. Settings F5 - F1 decrease in brightness.
Operation (continued) 6 Replacing the remote control battery 7 Disposing of used batteries When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones. On the back end of the remote, press and slide the battery door open and remove the old battery. Insert 2 AAA batteries, checking that the + and sides of the battery match inside the battery compartment. Replace the battery compartment door. NOTE: Do not mix old and new batteries.
Operation (continued) 8 Power cord information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a 2 prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 9 Patented Safer Plug® information This product is equipped with a Safer Plug®, which is an advanced safety device that helps prevent electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM ROOT CAUSE Fireplace has reached set temperature. Fireplace stopped heating before reaching Temperature around fireplace might be a few the desired temperature. degrees higher than other area in the room. CORRECTIVE ACTION Set Fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting (continued) PROBLEM Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed. ROOT CAUSE CORRECTIVE ACTION The heater is disabled. With the power on press and hold the POWER button on the control panel for 10 seconds. Once re-enabled the emberbed lights will flash multiple times. There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace.
Replacement Parts For replacement parts, call our customer service department at 1-800-998-7021, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part 1 2 3 4 5 6 7 8 9 Description Qty. Flame Circuit Board Flame Generator Driver Mode Emberbed with Log Set Control Panel Circuit Board Main Circuit Board Thermostat Sensor Blower / Heater Assembly Front Glass Assembly Remote Control 1 1 1 1 1 1 1 1 1 1 2 4 3 5 6 7 8 20 9 HomeDepot.
Notes 21 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Notes 22 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Notes 23 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
