007526611/319988502/611768148974/23DM1866-PC82 1007528604/319988489/611768150465/23DM1866-PG03 1007526611/319988353/611768148974/23DM1866-PG77 USE AND CARE GUIDE GRANVILLE 43-IN. CONVERTIBLE MEDIA CONSOLE ELECTRIC FIREPLACE Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any questions regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. Do not sit on any part of the mantel. It is recommended to work on a soft surface like a rug or to lay out a blanket to protect the furniture from getting scratched during the assembly process.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA BB CC DD II JJ KK LL Part EE FF GG HH Description Part Number Quantity AA Screw- Ø3 x 12 mm PH-SCRBLK007 2 BB Screw- Ø4 x 25 mm PH-SCRBLK018 5 CC Screw- Ø3.5 x 12 mm PH-SCRBLK013 7 DD Bolt- Ø6.3 x 12 mm PH-BLTBLK002 9 EE Bolt- Ø4 x 12 mm PH-BLTZNC013 4 FF Screw- Ø3.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit.
Assembly 1 Assembling the Surround Panels the Front Contact 2 Attaching Surround Panel Locate the pre-attached metal brackets found on the Left Front Panel (B) and the Right Front Panel (C) and rotate to span across the edges to the Front Surround Panel (D). Align the pre-installed hardware on the edges of the decorative panels on the Left Front and Right Front Panels (B and C) with the pre-drilled holes on edges of the Front Contact Surround Panel (E).
Assembly (continued) 4 Preparing the Fixed Shelf 5 Attaching the Side Panels Locate the Left and Right Side Panels (H and I) and the Fixed Shelf (F). Insert the pre-installed hardware on the edges of the Fixed Shelf (F) into the pre-drilled holes on the Left and Right Side Panels (H and I). Secure the panels in place by tightening the fasteners with a Phillips screwdriver as shown. 1/8 in. Insert Bolts (DD) into pre-drilled holes in Fixed Shelf (F) as shown, but do not tighten all the way.
Assembly (continued) 8 Installing the Fireplace Heater 7 Attaching the Insert Brackets Locate the Brackets (EF) and secure to each side of the Heater Box (EB) using Bolts (EE). Rest the hinges of the Heater Box (EB) on the previously installed mounting bolts. Secure the heater in place by screwing Bolts (DD) through the other side of the hinges on the Heater Box (EB) and into the Fixed Shelf (F) above. EE EB DD EF F EF EB 9 Placing the Glass Front Locate the Glass Panel (J).
Assembly (continued) 10 Attaching the Base Align and insert the pre-installed hardware on the edges of Base (A) with the pre-drilled holes on the main assembly. A 11 Attaching the Top Panel Locate the mantel Top Panel (G) and align the pre-drilled holes in the Top Panel (G) with the pre-installed screws on the top edges of the main assembly. After inserting the screws into the holes, tighten the fasteners from underneath the mantel Top Panel (G) using a Phillips screwdriver as shown.
Assembly (continued) 12 Assembling the Log Set Place the Log Set Left (EC) into the Ember Bed (EG) as shown. Repeat with the Log Set Right (ED). EC ED EG 13 Assembling the Log Set Route the wires of the Log Set Left (EC) and the Log Set Right (ED) down the back of the Ember Bed (EG) and into the receiving tabs to secure in place. Refer to the lower diagram. Gently plug the cords from both the Log Set Left (EC) and the Log Set Right (ED) into the ports as shown.
Assembly (continued) 15 Securing the Log Set Once the log set is in place, secure with Screws (CC) through the bottom of the log set and into the base. 16 Connecting the Fireplace Wiring Connect Key Button Connection Wire to heater. Insert the Ember Bed Connection Wire into the heater. Route the Ember Bed Connection Wire down the side surround rail and along the back of the log set, securing it in place with the clips as shown. CC 17 Placing the Fireplace Background Locate the Back Panel (K).
Assembly (continued) the Support to the Top 18 Securing the Fireplace Background 19 Attaching Corner Panel Place the Back Panel Brackets (GG) between the Back Panel (K) and the grooves of the assembly as shown. Fasten each Back Panel Bracket (GG) using Screws (FF). Repeat until all brackets are in place as indicated by the diagram.
Assembly (continued) 21 Installing the Tipping Restraint Hardware When the Tipping Restraint Hardware (HH) is properly installed, it can provide protection against unexpected tipping of the unit due to small tremors, bumps or climbing. Each Tipping Restraint Hardware (HH) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and two Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to the left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the Fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the Flame There are 5 brightness levels that can be selected and OFF (00) setting. Settings F5 - F1 decrease in brightness.
Operation (continued) 6 Replacing the Remote Control Battery 7 Disposing of Used Batteries When the remote control stops operating or its range seems reduced, it is time to replace the batteries with new ones. On the back end of the remote, press and slide the battery door open and remove the old battery. Insert two AAA batteries, checking that the + and sides of the battery match inside the battery compartment. Replace the battery compartment door. NOTE: Do not mix old and new batteries.
Operation (continued) 8 Power Cord Information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 9 Patented Safer Plug® Information This product is equipped with a Safer Plug®, which is an advanced safety device that helps prevent electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM ROOT CAUSE Fireplace has reached set temperature. Fireplace stopped heating before reaching Temperature around fireplace might be a few the desired temperature. degrees higher than other area in the room. CORRECTIVE ACTION Set the fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting PROBLEM The remote control is not working. ROOT CAUSE CORRECTIVE ACTION There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace. Press the remote control buttons with an even motion and gentle pressure. Repeatedly pressing buttons in rapid succession may cause the transmitter to malfunction. The remote is too far from the heater.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty.
Notes 23 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
