Use and Care Manual

11
HomeDepot.com
Please contact 1-877-527-0313 for further assistance.
10
Align and insert the pre-installed hardware on the edges of Base (A) with the pre-drilled holes on the main assembly.
Attaching the Base
Assembly (continued)
11
Locate the mantel Top Panel (G) and align the pre-drilled holes in the Top Panel (G) with the pre-installed screws on the top
edges of the main assembly.
After inserting the screws into the holes, tighten the fasteners from underneath the mantel Top Panel (G) using a Phillips
screwdriver as shown.
Attaching the Top Panel
G
A