Use and Care Manual
12
Place the Log Set Left (EC) into the Ember Bed (EG) as shown. Repeat with the Log Set Right (ED).
13 14
12
Route the wires of the Log Set Left (EC) and the Log Set
Right (ED) down the back of the Ember Bed (EG) and into
the receiving tabs to secure in place. Refer to the lower
diagram.
Gently plug the cords from both the Log Set Left (EC) and
the Log Set Right (ED) into the ports as shown. Ensure the
cords are plugged in straight.
Place the assembled log set into the back of the unit
behind the glass panel.
Push the tabs beneath the log set into the holes on the
bottom panel.
Assembling the Log Set Assembling the Fireplace
Assembling the Log Set
Assembly (continued)
ED
EC
EG
EG










