Use and Care Manual

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

Connect Key Button Connection Wire to heater.

Insert the Ember Bed Connection Wire into the heater.

Route the Ember Bed Connection Wire down the

side surround rail and along the back of the log set,

securing it in place with the clips as shown.

Locate the Back Panel (K).

Only slightly bend the wallpaper and t it into the back of the replace.

Note that this back panel is reversible and can be placed with either side facing the replace insert for a customizable look.

Connecting the Fireplace Wiring

Placing the Fireplace Background

Once the log set is in place, secure with Screws (CC)

through the bottom of the log set and into the base.

Securing the Log Set

Assembly (continued)