Installation Guide

HomeDepot.com

Please contact 1-877-527-0313 for further assistance.

1918

Locate the two Adjustable Shelves (M).

Insert the Shelf Pins (MM) into the pre-drilled holes on the

inside of each cabinet side panel at your desired height.

Align all pins to the same height to ensure your shelf is level.

Rest the Adjustable Shelves (M) on the Shelf Pins (MM) as

shown.

Place the Log Set Left (EC) into the Ember Bed (EG) as

shown. Repeat with the Log Set Right (ED).

Assembling the log set

Inserting the adjustable shelves

Lift the Left Door (K) and align the hinges with the pre-attached hardware on the main assembly as shown.

Slide the barrel of the hinge on the door downward onto the pin of the hardware on the main assembly.

Repeat steps with the Right Door (L).

Attaching the cabinet doors

Assembly (continued)