Installation Guide

15
HomeDepot.com
Please contact 1-877-527-0313 for further assistance.
23
25
24
Connect Key Button Connection Wire to heater.
Place the Back Panel Brackets (LL) between the Back Panel
(C) and the grooves of the assembly as shown.
Fasten each Back Panel Bracket (LL) using Screws (KK).
Repeat until all brackets are in place as indicated by the
diagram.
Locate the Back Panel (C).
Only slightly bend the wallpaper and t it into the back
of the replace.
Note that this back panel is reversible and can be
placed with either side facing the replace insert for a
customizable look.
Insert the Ember Bed Connection Wire into the heater.
Route the Ember Bed Connection Wire down the
side surround rail and along the back of the log set,
securing it in place with the clips as shown.
Connecting the replace wiring
Securing the replace background
Placing the replace background
Assembly (continued)
C
C
LL
KK
Key Button
Connection Wire
Ember Bed
Connection Wire