Installation Guide

8
3
Locate the Left and Right Side Partitions (D and E).
Align the Left and Right Side Partitions (D and E) with ends
of the Center Shelf (B), as shown.
Align the top of Center Shelf Front Rail (O) with the bottom of
Center Shelf (B).
Insert the pre-installed hardware on the bottom of the Center
Shelf (B) into the pre-drilled holes on the top of the Center
Shelf Front Rail (O).
Insert the pre-installed hardware on the ends of the Center
Shelf (B) into the pre-drilled holes on the edges of the Left and
Right Side Partitions (D and E) as shown.
Secure the Left and Right Side Partitions (D and E) to ends of
the Center Shelf (B) by tightening the fasteners with a Phillips
screwdriver as shown.
Attaching the side partitions
21
Insert Screws (AA) into pre-drilled holes in Center Shelf
(B) as shown, but do not tighten all the way. Leave each
screw head about 1/8 in. out from the shelf.
Secure the Center Shelf Front Rail (O) to the Center Shelf
(B) by tightening the fasteners with a Phillips screwdriver
as shown.
Preparing the center shelf
Attaching the center shelf front rail
Assembly
E
E
D
D
B
B
AA
B
B
O
4
Locate the pre-attached metal brackets found on the front
rail of the Center Shelf (B) and rotate to span across the
edges of Left and Right Side Partitions (E, D).
Secure each bracket across each joint with a Screw (CC)
and Phillips screwdriver.
Securing the side partitions
CC
1/8 in.