007528823/319988491/611768150915/23MMP1549-PP05 1007528786/319988490/611768150908/23MMP1549-PT01 1007528870/319988501/611768150731/23MMP1549-PB01 USE AND CARE GUIDE RYDEN ELECTRIC FIREPLACE MEDIA MANTEL Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
Table of Contents Maximum Load Warning............................................ 2 Safety Information...................................................... 3 Warranty...................................................................... 5 Pre-Assembly.............................................................. 6 Hardware Included ................................................... 6 Product Specifications........................................................ 6 Tools Required.........................
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. 2. 3. 4. 5. 6. 7. 8.
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. The cord must remain unplugged whenever you are adjusting/assembling the fireplace.
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.
Pre-Assembly HARDWARE INCLUDED AA BB CC DD EE FF GG HH KK LL MM NN OO PP QQ RR Part Description JJ II Part Number Quantity AA Screw 4 x 50 mm PH-SCRBLK006 8 BB Screw 3 x 12 mm PH-SCRBLK004 2 CC USB output P23MMP1549-CC 1 DD Screw 3 x 15 mm PH-SCRBLK010 4 EE Magnetic Catch PH-MCHBRW001 2 FF Back Panel Bracket PH-BKTBLK017 16 GG Screw 3.
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. G H I H L D L B L E C F L M A K J Part Description Quantity A Bottom Shelf 1 B Left Partition 1 C Right Partition 1 D Media Shelf 1 E Left Side Panel 1 F Right Side Panel 1 G Top Panel 1 H Side Back panel 2 I Upper Back Panel 1 J Left Door 1 K Right Door 1 L Adjustable Shelf 4 M Electric Fireplace Insert 1 7 HomeDepot.
Assembly 1 Attaching the center assembly Locate the Media Shelf (D) and the Left and Right Partitions (B and C). Align the Media Shelf (D) between the Left and Right Partitions (B and C). Push together, inserting the pre-installed screws on the Media Shelf (D) into the holes on the Left and Right Partitions (B and D) as shown. Tighten the fasteners on the Left and Right Partitions (B and C) using a Phillips Screwdriver. D C B 2 Attaching the base Locate the Bottom Shelf (A).
Assembly (continued) 3 Attaching the side panels Locate the Left and Right Side Panels (E and F). Align the Left and Right Side Panels (E and F) with the Bottom Shelf (A). Insert Screws (AA) through the Bottom Shelf (A) and into the pre-drilled holes on the edges of the Left and Right Side Panels (E and F) as shown. F E A AA 4 Installing the USB port BB Slide the USB output (CC) through the opening in the center shelf.
Assembly (continued) 5 Attaching the back panels Locate the Side Back panel (H) and the Upper Back Panel (I). Slide the Side Back panel (H) into the grooves between the center partitions and the outer side panels as shown. Slide all the way down until the Side Back panel (H) meet the bottom shelf. H H Slide the Upper Back Panel (I) into the grooves between the center partitions. Slide all the way down until the Upper Back Panel (I) meets the bottom of the center shelf.
Assembly (continued) 7 Attaching the cabinet doors Lift Left Door (J) and align the hinges with the pre-attached hardware on the main assembly as shown. Slide the barrel of the hinge on the door downward onto the pin of the hardware on the main assembly. Repeat steps with Right Door (K). K J 8 Attaching the door catch Locate the Top Panel (G) and place on a flat surface. Attach the Magnetic Door Catches (EE) on each side of the Top Panel (G) using Screws (DD) as indicated by the diagram.
Assembly (continued) 9 Attaching the top panel Place the Top Panel (G) on top of the main assembly while aligning the pre-installed screws with the screw holes on the edges of the main assembly. After inserting the screws into the holes, tighten the fasteners from underneath the Top Panel (G) using a Phillips Screwdriver as shown. G 10 Attach door bumpers Place a Door Bumper (JJ) on the lower corner of each door, opposite from the hinges as shown.
Assembly (continued) 11Securing the surround brackets Find the pre-attached metal plate bracket behind the top surround rail. Rotate the bracket to span the joint of the top surround rail and side surround rail. Secure the surround bracket with a Screw (HH). HH Repeat to secure both sides. 12Securing the back panels Place the Back Panel Brackets (FF) between the back panels and the grooves of the assembly as shown. Fasten each Back Panel Bracket (FF) using Screws (GG).
L Assembly (continued) 13 Inserting the adjustable shelves Locate the four Adjustable Shelves (L). Insert the Shelf Pins (KK) into the pre-drilled holes on the inside of each cabinet side panel at your desired height. Align all Shelf Pins (KK) to the same height to ensure your shelf is level. Rest the Adjustable Shelves (L) on the Shelf Pins (KK) as shown.
Assembly (continued) 15 Securing the fireplace insert Align the Metal Brackets (MM) behind the Fireplace Insert (M) and above the pre-drilled holes. Secure with the Mounting Screws (LL) on both sides. LL MM 15 HomeDepot.com Please contact 1-877-527-0313 for further assistance.
Assembly (continued) 16 Installing the tip restraint hardware NN When the Tipping Restraint Hardware (NN) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps or climbing. Wall Each Tipping Restraint Hardware (NN) includes one Unit Anchor, one Wall Anchor, one Anchor Tether, and four Anchor Screws. Use these to complete the following steps for a proper installation. Locate a secure wall stud behind the unit closest to the left side.
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. 1 Powering the fireplace 2 Push the Power button to supply power to all functions of the fireplace and put the insert in a standby mode. Push the Power button again to turn off all functions. Adjusting the flame There are 5 unique 3D flame colors that can be selected.
Operation (continued) 5 Adjust the fan speed 6 Fan oscillation Pressing this button will turn on or off the oscillation feature. When on, the louvers will oscillate back and forth to distribute the air flow to a wider area. Press the Fan button in succession to cycle through the speed settings; 1 (lowest speed) 2 (middle speed) 3 (highest speed.) and 0 (OFF).
Operation (continued) 9 Power cord information This heater is for use on 120 volts. The cord has a plug as shown in the figure. Connect to properly grounded outlets only. Do not use a two-prong adapter. Never use with an extension cord or relocatable power tap (outlet/ power strip). 10 Patented Safer Plug® information This product is equipped with a Safer Plug®, which is an advanced safety device that helps detect electrical fires caused from faulty outlets.
FCC/IC Information WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Troubleshooting PROBLEM Fireplace stopped heating before reached desired temperature. ROOT CAUSE CORRECTIVE ACTION Fireplace has reached set temperature. Temperature around fireplace might be a few degrees higher than other area in the room. Set the fireplace to a higher temperature or always “on”. Display shows " " The thermostat sensor is broken or disconnected. Unplug the fireplace, remove the back panel of the fireplace and check that the thermostat is plugged into the main circuit board.
Troubleshooting (continued) PROBLEM Flame effect works but heater function does not and the emberbed flashes when the Heater button is pressed. ROOT CAUSE CORRECTIVE ACTION The heater is disabled. With the power on press and hold the Power button on the control panel for 10 seconds. Once re-enabled the emberbed lights will flash multiple times. There are no batteries. Change the remote batteries. The signal is poor. Operate remote transmitter at a slow measured pace.
Replacement Parts For replacement parts, call our customer service department at 1-877-527-0313, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
