Installation Instructions StyleWell Roller Shades 1A Outside mounting 1C Ceiling mounting 1B Inside mounting
A 1 2 3 Installation for the shade with adjustable square pin end: Install the left end of the roller into the bracket(see Fig. 1), then depress the adjustable square pin end and mount into the bracket(see Fig. 2 & 3) 2B 1 2 Installation for the shade with non-adjustable square pin end: Install the left end of the roller into the bracket(see Fig. 1), then mount the square pin end into the bracket(see Fig.
Loose or weak tension 1 Pull the shade down to test the tension strength 2 If the shade rolls up too slowly 3 Turn the adjusting dial clockwise to increase lifting speed Over tension 1 Pull the shade down to test the tension strength 2 If the shade goes up too quickly 3 Turn the adjusting dial counter clockwise to slow down the lifting speed
Stop position alteration 1A If you want the shade stop at a lower position 1B If you want the shade stop at a higher position 2A Just remove the stop end plug square pin end from the bracket. Keep the opposite end of the roller on the bracket and avoid removing from the bracket 2B Just remove the stop end plug square pin end from the bracket.