Instructions / Assembly

8
Maintenance
□ Check bolts/screws periodically and tighten them if necessary.
Care and Cleaning
□ Dust this item regularly with a soft, lint-free cloth to prevent soil buildup.
Wipe away spills immediately to prevent staining using a clean cloth dampened with water.
Do not use liquid or abrasive cleaners on the metal frame, as this may damage the nish.
□
□
Troubleshooting
Problem Solution
Not all of the product's legs touch
the oor.
The product is KD construction. You may need to loosen the bolts and place the product on a at surface.
Ensure that the legs all touch the at surface and then re-tighten the bolts.
One or more of the bolts do not t
in the holes correctly.
The product is KD construction. Do not fully tighten the bolts before all the bolts are completely lined up
and inserted into holes. Loosen the bolts and make sure all bolts are lined up and inserted into the holes.
Make sure adjustable center feet levelers are adjusted properly. The levelers are pre-assembled on the
bottom of the legs.
Loosen all the bolts and apply some weight to the product to get all the feet to touch the oor. Then
re-tighten the bolts in that position.
To double check if the side rails, slats or center legs with right assembly position .