Item # 1002 060 499 Model # GSS00224BW USE AND CARE GUIDE 2 PERSON STEEL SLING SWING WITH CANOPY Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM THANK YOU y through the purchase of this swing. We strive to continually create quality products designed to enhance your home.
Table of Contents Pre-Assembly ................................................................ 3 Planning Assembly .................................................................. 3 Hardware Included .................................................................. 3 Package Contents................................................................... 4 Assembly ........................................................................ 5 Care and Cleaning ................................ ...................
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Assembly (continued) PACKAGE CONTENTS L J M K A C F B I H G H E D Part Description N Quantity A Top bar 1 B Front leg 2 C Back leg 2 D Back support bar 1 E F G H Seat Back Arm Side bar & short swing pipe 1 1 2 4 I Long swing pipe 2 J Curved bar 2 K Support bar 3 L M N Canopy Screw knob Ground bumper 1 2 4 4
l Assembly 1 Assembling the swing frame Attach two sets of the legs (B & C) to the top bar (A) using M8x95 combination bolts, washers and nuts (AA). Attach the two side bars (H) to the legs (B & C) using M6x50 combination bolts, washers and nuts (DD). Attach the back support bar (D) to the back legs (C) using M6x50 combination bolts, washers and nuts (DD). Tighten all of the bolts using the hex wrench (GG) and the wrench (HH). Assemble the ground bumpers (N) onto the legs (B & C).
Assembly (continued) 2 Attaching the seat and back to the arms Attach the seat (E) to the arms (G) using M8x40 combination bolts (BB). Attach the back (F) to the arms (G) using M6x65 combination bolts, washers and nuts (CC). NOTE: Fully tighten all bolts using the hex wrench (GG) and the wrench (HH).
l (continued) Assembly 3 Attaching the long swing pipes and the short swing pipes to the arms Attach the long swing pipes (I) and the short swing pipes (H) to the arms (G) using M6x50 combination bolts, washers and nuts (DD). Connect the top of the two swing pipes (H and I) by using the hooks (FF). Once all of the bolts are in place, fully tighten the bolts. FF 2X FF I H F DD G I 2X H DD DD DD G E 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Assembly (continued) 4 Attaching the seat to the swing frame Attach the assembled seat frame to the swing frame using the hooks (FF).
l (continued) Assembly 5 Assembling the top frame Attach the support bars (K) to the curved bars (J) using M5x30 bolts (EE). Tighten all of the bolts on the top frame before placing the canopy. NOTE: Please pay attention to the direction of the top curved bars (J). L K J J K EE J Velcro 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
l (continued) Assembly 6 Attaching the top frame to the top bar Attach the top frame to the top bar (A) using the screw knobs (M) on both sides. Adjust the angle of the top frame and fully tighten the screw knobs (M) in the clockwise direction. M M Care and Cleaning For best results, clean the swing with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate. Do not clean with abrasive materials, bleach, or solvents.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.