Item # 1004298238 Model # Lowe HB SC USE AND CARE GUIDE 30 IN. CHARLESTON HIGH BAR STOOL (SET OF 2) Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this 30 IN. CHARLESTON HIGH BAR STOOL (SET OF 2).
Table of Contents Hardware Included ................................................................... 3 Package Contents .................................................................... 4 Assembly ....................................................................... 5 Table of Contents .......................................................... 2 Safety Information ......................................................... 2 Warranty ...................................................................
Pre-assembly PLANNING ASSEMBLY □ □ □ □ Remove all packaging materials. Refer to the parts and hardware lists, and ensure all parts and hardware are present before assembly. Contact customer service for missing parts. Place all wooden parts on a clean, flat and soft surface (e.g. carpet or rug) to prevent scratch and damage to parts. ASSEMBLY TOOL INCLUDED IN HARDWARE PACK HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-assembly (continued) PACKAGE CONTENTS 1 2 5 5 6 7 Part 1 2 3 4 5 6 7 4 3 Description Back rest Seat Left - Front Leg Right – Front Leg Quantity 1 1 1 1 2 1 1 Side Rung Front Rung Cover 4
Assembly 1 Fastening the seat 2 Fastening the legs □ □ Place the backrest (1) and seat (2) on a soft surface to avoid any scratches or to the product. □ Align the holes on backrest (1) with the holes on the seat(2). Use your left hand to push the seat frame floorwards, depicted by Arrow 1. This action helps to ensure the seat (2) is pressed towards to backrest (1) with no gap between these. Fasten the front legs (3)(4) into the seat with screws (A) and washers (C) and lock washers (D) to 60%.
Assembly (continued) 3 4 Connecting all rungs □ □ Place the chair onto the side of a table, keep the chair bottom and legs facing skywards.Connect all rungs into legs with screws (B) to 100%. Connecting all rungs Place the chair onto the side of a table, keep the chair bottom and legs facing skywards. Connect all rungs into legs with screws (B) to 100%.
Assembly (continued) 5 Level the chair Tightening up all screws 6 Putting bottom cover back . □ □ Place the chair on a level surface and keep 4 legs straight down on the floor, then tighten up all screws to 100%. Put bottom cover back on the seat.
Troubleshooting PROBLEMS SOLUTION According to the parts label on the Instruction Runner, check whether the wooden legs or rung are installed in the wrong direction. Rung not fit into the leg / If they are wrong, re-assemble according to the correct part label onthe Instruction Runner. wobbly/not level. For dining chair, lock the screws to 60% first, then tighten the screws to 100% after put on a level platform.
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
