Instructions / Assembly

5
Assembly
1
Attach the top frame (B) to the side frame (C) with bolt (BB) and
tighten with Allen wrench (BB) . Do not fully tighten bolts.
2
Assembly
3
Attaching the Large table top
4
Attaching the Top frame Attaching the shelf support
Attach the wood top (A) to wood shelf (D) to pre-assembled metal base
with screw (CC).
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach the shelf support (E) to the side frame (C) with bolt (AA)
and tighten with Allen wrench (BB).
C
C
B
E
E
E
E
A
D
D
D
D
Attaching the wall anchors
After locating the desired placement for your unit,drill 2 small guide holes
and insert the anchors (HH) into your wall.Then attach metal plate (FF) to
wall using screws (EE),Use a Phillips head screw driver (not included) to
tighten the screws.
NOTE: Table top (A) does not have pre-drilled holes.
Wood screws (CC) will make their own holes in table top (A)
and shelf (D).
NOTE:For your safety,to prevent the tanger of this unit tipping
over,it is important that the wall anchors are properly attached.