Use and Care Manual

7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Using the Remote Control
1
Installing the battery
The battery is supplied with the remote control. The first thing to do with the remote control is to remove the plastic sheet
insulated the battery. For replacement battery, use lithium-based CR2025 battery. Please follow the sequence below to
replace the battery.
□ Take out the battery bracket.
□ Insert the battery with the button side into the battery bracket, making sure the battery is firmly seated.
□ Press the battery bracket into the remote control, making sure it snaps into position.
□ Turn the remote over and aim it towards the fireplace/heater unit.
□ Press the power button on the top and see if the flames on the fireplace/heater turn on or off.
□ If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
2
Using the remote control
□ The operation of the remote control buttons work
the same as the buttons on the front panel of the
fireplace/heater. Review the operation section for
more information on the functionality of these
buttons.
OPE N
PUSH
OPEN
P
USH
1
2
CR2025
LITHIUM BATTE RY
3V
OPEN
PUSH
OPEN
PUSH
WARNING: Do not ingest batteries.
1. Non-rechargeable batteries are not to be recharged.
2. Batteries are to be inserted with the correct polarity.
3. Exhausted batteries are to be removed from the product.
4. Always purchase the correct size and grade of battery most suitable for the intended use.
5. Replace all batteries of a set at the same time.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Remove batteries from equipment when not used for an extended period of time.
Main Power
Heater Control
Flame Control
NOTE:
Battery disposal
Please always dispose of batteries
at a suitable recycling point.