Model #: XMB1015 Item #:1004104588/1004104589 1004104590/1004104591 USE AND CARE GUIDE Banwick Solid Wood Platform Bed with Peg Leg - Queen/King Questions, problems, missing parts? Before returning to the store, call Customer Service. 8 a.m. –7 p.m., EST, Monday –Friday, 9 a.m. –6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Stylewell through the purchase of this Banwick Solid Wood Platform Bed with Peg Leg - Queen/King.
Table of Contents Table of Contents .............................................................. 2 Safety Information .............................................................. 3 Warranty.............................................................................. 4 What is Covered .................................................... 4 What is n ot Covered............................................ 4 Pre-Assembly.............................................................. 4 Planning Assembly......
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at 1-877-527-0313, 8 a.m. –7 p.m., EST, Monday –Friday, 9 a.m. –6 p.m., EST, Saturday □ Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
Warranty 1 YEAR WARRANTY WHAT IS COVERED We guarantee this product to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED This warranty does not cover commercial use, acts of nature, and abusive use. Pre-Assembly Planning Assembly □ □ □ □ Remove all packaging materials, staples and packing straps from the carton. Refer to Parts List and Hardware List, and ensure parts and hardware are correct before assembly. Contact customer service for missing parts.
Pre-Assembly (cont.
Assembly 1.Place side panels (Bx2) horizontally and insert wood dowel (AAx8) into the showed holes. x2 2.Take out the panels (Ax2) facing up,screw cam bolt (BBx4) and locking pins(DDx4) into the correct holes as shown photos.
Assembly (Cont.) 3.Assemble legs to side panels(Bx2). Place the legs(Cx4) vertically,attach side panels(Bx2)to legs(Cx4) with screw(MMx8),use allen key(NN)to drive screw(MM) as shown. x2 4.Take out center support(D),fasten support legs (Ex2) to center support(D) with screw(GGx4).Use allen key(OO) to drive screw(GG).
Assembly (Cont.) 5.Assemble panels(Ax2) to side panels (Bx2). Attach panels(Ax2) from step 2 to side panels(Bx2) via cam bolts(BB) & locking pins(DD). Put the locking nuts (EE) together with locking screw (FF) into the large round holes and go through the lockin pins(DD) in shown photos,use wrench(PP) to drive locking screw(FF) tightly. Put the cam lock (CCx4) into the small holes on reverse of side panels(Bx2),fasten cam bolts(BB) tightly via regular screw driver(this is not included in hardware list).
Assembly (Cont.) 6.Assemble hinge(HH) to panels (Ax2) via screw (II) and fasten screw(II) tightenly.
Assembly (Cont.) 7.Attach center support (D) from step 4 to hinges (HH) from step 6,fasten screw(JJ) via screw nut(LL) fitted with washer(KK) by wrench(QQ) and allen key(OO).
Assembly (Cont.) 8.Lay the 2 sets of slat (F) to fit on the rail on the sideboards. Check and ensure that the designated slat on each set is firmly affixed to the raill on the sideboard. Remove adhesive covering from the 2 pieces of slate. The assembly of the bed platform is complete.
Maintenance □ □ □ □ Keep the product away from direct heat and sunlight. Prolonged exposure to heat sources may cause scorching, or even cause color to fade. Regular vacuuming or light brushing helps to remove dirt and prevent soil build-up, which increases the appearance wear. Periodically (every 90 days) make sure that the screws are fully tightened. Care and Cleaning □ □ □ □ □ □ □ □ □ Handle with care. Use a slightly damp cloth to clean the product. Do not use bleach or use abrasive cleaning material.
Questions, problems, missing parts? Before returning to the store, call Customer Service. 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
