MSDS

SECTION 4
FIRST AID INSTRUCTIONS
Skin Contact: Wash exposed area with a soap solution or water.
Eye Contact: Immediately flush eyes with water for 15 minutes. Immediately contact a physician for
additional treatment.
Inhalation Exposure: Remove victim from contaminated area to fresh air. Apply appropriate first aid
treatment as necessary.
Ingestion: Do not feed anything by mouth to an unconscious or convulsive victim.
Specific: Do not induce vomiting. Immediately contact a physician. Dilute contents of stomach using 3-4
glasses of milk or water.
SECTION 5
FIRE AND EXPLOSION HAZARD DATA
Not Flammable
Flash point: >200 degrees F Seta
Flammable limits: N/A
Extinguishing media: N/A
Auto-ignition Temperature: None
Special Fire Fighting Procedures: None
Unusual Fire and Explosion Hazards: None
Explosion Data: None
Hazardous Decomposition Products: None.
SECTION 6
SPILL INSTRUCTIONS
Spill Instructions
General: Ventilate area. Place in waste disposal container.
Specific: Flush area with water. Wet area may be slippery. If so, spread sand or grit.
SECTION 7
STORAGE AND HANDLING PRECAUTIONS
Storage Instructions: Keep container closed. Keep dry and out of reach of children and pets.
Handling Instructions: Normal chemical handling.
Styro Industries Flex Coat Page 2 of 4