MSDS

SECTION 8
EXPOSURE CONTROL - SPECIAL PROTECTIVE EQUIPMENT
Ventilation Protection: Adequate ventilation.
Recommended Respiratory Protection: If ventilation is inadequate, use a mask with dust/mist/fume
cartridges.
Recommended Skin Protection: Rubber gloves.
Other Protective Equipment: Full coveralls.
Recommended Eye Protection: Splash proof chemical goggles.
Personal Hygiene: Wash thoroughly after handling product.
Exposure Limits ACGIH TLV - none established
Exposure Limits OSHA PEL - none established
SECTION 9
PHYSICAL DATA
pH: Approx. 8.0
Fl. Pt.: > 200F Seta (cc) non-flammable
Vapor Pressure: 17.5 mm Hg
Vapor density: 1 (water = 1)
Evap. Rate: < l (ether = l)
Physical State: thixotropic, opaque liquid
Percent volatile by volume: Approx. 22%
VOC: 35.5 gm/L
Sp. Gr. 1.22
% Solubility (water): dispersible in water (partially soluble).
SECTION 10
STABILITY AND REACTIVITY
Chemically stable water-based coating. No known conditions promote severe chemical instability or
reactivity.
SECTION 11
TOXOLOGICAL DATA
Effects of acute or chronic exposure have not been determined.
Product contains no materials known to be teratogenic, mutagenic, or. carcinogenic.
Reproductive toxicity or embryo-toxicity is not known.
SECTION 12
ECOLOGICAL INFORMATION
Aquatic toxicity is not known. Product is mildly alkaline, therefore higher concentrations of the product
in estuaries may increase the pH of the estuary slightly.
SECTION 13
DISPOSAL INFORMATION
Disposal Instruction
General: Dispose in accordance with local, state, and federal regulations.
Styro Industries Flex Coat Page 3 of 4