MSDS

Styro Industries FP Ultra Lite Panels Page 1 of 3

MATERIAL SAFETY DATA SHEET

U.S. Department of Labor

Occupational Safety and Health Administration

SECTION 1

IDENTIFIERS

COMPANY: Styro Industries

ADDRESS: P.O. Box 8098, Madison, WI 53708

EMERGENCY PHONE NUMBER: 920-702-9920

PRODUCT: FP Ultra Lite Panels

CHEMICAL GROUP: Polystyrene rigid insulation

EFFECTIVE DATE: March 2004

SECTION 2

COMPOSITION

Chemical Name CAS No. %B.W. TLV

Polystyrene 9009-53-6 major 3 mg/M

HCFC-142b 75-68-3 minor 2000 g/M

* LD50

Acrylic resin emulsions proprietary major not established

quartz silica 14808-60-7 major 0.1 mg/M

hydrated aluminum silicates 1332-58-7 minor 5 mg/M

titanium dioxide 13463-67-7 minor 5 mg/M

hydroxyethyl cellulose 9004-62-0 minor not hazardous

Preservatives

4,5-dichloro-2-n-octyl-4-isothiazolin-3-one 2634-33-5 minor 0.1 mg/M

* STEL

Calcium carbonate 1317-65-3 major 5 mg/M

Calcium silicate 12168-85-3 major 5 mg/M

* Note - as respirable dust (or mist) TWA.

Generic Description: A rigid polystyrene insulation panel coated with acrylic binder and aggregate.

SECTION 3

PHYSICAL DATA

Appearance: solid pink polystyrene panel coated with stone aggregate

pH: Approx. 9.0

Fl. Pt.: > 600F Seta (cc) non-flammable

Vapor Pressure: N/A

Vapor density: N/A

Evaporation Rate: N/a

Physical State: solid

Percent volatile by volume: none

Sp. Gr. 1.4 lb per sq. ft. at 1” thickness

% Solubility (water): not soluble

PAGE 1
MATERIAL SAFETY DATA SHEET U.S. Department of Labor Occupational Safety and Health Administration SECTION 1 IDENTIFIERS COMPANY: Styro Industries ADDRESS: P.O.
PAGE 2
SECTION 4 FIRE AND EXPLOSION HAZARD DATA Flash point: >600 degrees F Seta Flammable limits: N/A Extinguishing media: Water, Carbon dioxide or dry chemical Special Fire Fighting Procedures: None Unusual Fire and Explosion Hazards: Produces dense black smoke while burning. Thermal Decomposition yields oxides of carbon, silicon, sodium, aluminum, iron, nitrogen, magnesium and trace halogens.
PAGE 3
SECTION 8 SPECIAL PROTECTIVE EQUIPMENT Ventilation Protection: Use adequate ventilation if grinding of the panels takes place. Recommended Respiratory Protection: If grinding takes place and ventilation is inadequate, use a mask with dust/mist/fume cartridges. Recommended Skin Protection: Work gloves. Other Protective Equipment: Full coveralls. Recommended Eye Protection: Safety glasses. Personal Hygiene: Wash thoroughly after handling product.