Installation Guide



BlackPipe&Nipple

GeneralAssemblyofPressurizedThreadedPipeandFittings

Blackpipeismadeofschedule40steelandissuitableforair,liquidpropane,gas,anddecor

applications.PipesarehydrostaticallytestedandmanufacturedtoASTMA53specifications.

Instructions

1.Turnoffgas,air,orliquidpropanesupplybeforeremovingoldpipes.

2.Beforeinstallation,checkallmaleandfemalecomponentsforanydamage,debris,orexcess

threadingoil.Cleanorreplacepartsasnecessary.

3.Applypipedopeorthreadsealtapetopipeandfittings.Followmanufacturer'sinstructionsfor

correctapplication.

4.Assemblethepipeandfittings.Hand‐tightenasmuchaspossible,thentightenanadditional4to5

turnswithapipewrench.

5.Checkforleaks.



PAGE 1
Black Pipe & Nipple General Assembly of Pressurized Threaded Pipe and Fittings Black pipe is made of schedule 40 steel and is suitable for air, liquid propane, gas, and decor applications. Pipes are hydrostatically tested and manufactured to ASTM A53 specifications. Instructions 1. Turn off gas, air, or liquid propane supply before removing old pipes. 2. Before installation, check all male and female components for any damage, debris, or excess threading oil. Clean or replace parts as necessary. 3.