Quick Start Manual

L Series Oven Installation 13

wolfappliance.com/specs

Install the Oven

MOUNT OVEN TO CABINETRY

Once the oven is fully inserted into the opening, locate the

mounting holes on the oven side trim. There are four

mounting holes for a single oven and six for a double

oven. Refer to the illustration below. Use a

" drill bit to

drill pilot holes into the cabinet. Using the wood screws

provided, secure the oven to the cabinet.

Location of mounting holes.

Failure to install the mounting screws may cause the

oven to tip forward during use.

OVEN DOOR REINSTALLATION

1) Hold the oven door on both sides and position it with

door hinges aligned with openings in the oven frame.

2) Holding the oven door at an approximate 30° angle

from vertical, slide the hinges into the openings

until the bottom hinge arms drop fully into the hinge

receptacles.

3) Open the oven door to its fully opened position.

Remove the hinge pins from each hinge. Refer to the

illustration below.

4) Reinstall the hinge retainer plate with upper and lower

mounting screws.

5) Open and close the door completely to ensure that it is

properly installed.

HINGE

RETAINER

PLATE

UPPER

MOUNTING

SCREW

HINGE PIN

Oven door reinstallation.