Owner's Manual
wolfappliance.com
|
13
OVEN OPERATION
LIGHT
COVER
Light bulb replacement.
Care Recommendations
CLEANING
Stainless
steel
Use a nonabrasive stainless steel cleaner and apply
with a soft lint-free cloth. To bring out the natural
luster, lightly wipe surface with a water-dampened
microber cloth followed by a dry polishing chamois.
Always follow the grain of stainless steel.
Black
glass
Spray glass cleaner on a cloth to clean.
Oven rack
guides
Remove and place on a at surface near the sink.
Clean with hot water and mild detergent or paste
of baking soda and water. Do not immerse in water.
Towel dry.
Control
panel
Use spray degreaser to remove ngerprints and food
soil. Spray on a cloth before wiping panel.
IMPORTANT NOTE: Do not spray cleaners directly
on the control panel.
Oven
interior
Before utilizing self-clean feature, use a razor blade
to gently lift baked on foods from oven cavity and
window. For stubborn stains, spray with a mild
abrasive cleaner or spray degreaser and scrub with
a no-scratch Scotch-Brite™ pad. Wash entire oven
cavity with soap and water to remove all cleaning
chemicals before entering self-clean mode. If residue
is not cleaned from the cavity, etching of the porce-
lain may occur. Once self-clean cycle is complete,
allow oven to cool completely and wipe out ash with
a damp cloth.
Broiler pan To clean the upper rack, use mild detergent and a
scouring pad. Rinse and dry. To clean the bottom
pan, discard grease and wash with hot water and
mild detergent. Rinse and dry. The stainless steel
upper rack is dishwasher safe, however, do not place
the porcelain-coated rack or pan in dishwasher.
Oven Light
WARNING
Verify power is disconnected from electrical box before
replacing light bulb.
Allow oven to cool completely, then remove oven racks and
rack guides. To remove the light cover, gently pry bottom
edge with a at screwdriver. Remove existing bulb and
replace with a 20-watt halogen bulb. Refer to the illustration
below.