Quick Start Manual

Downdraft Specifications 6
25
1
/
8
" (
638) min
FLAT COUNTERTOP
7
11
/16
" (197)
24"min (610)
CABINET DEPTH
2
1
/2
" (64) min
EDGE OF
COOKTOP
TO WALL
7
1
/8
"
(181)
2
1
/2
" (64) min
2
3
/4
" (70)
COOKTOP CUT-OUT
WIDTH
1
9
1
/4
"
(
489)
2
7"
(686), 3
3"
(838) OR 4
2"
(1067)
DOWNDRAFT CUT-OUT
2
5
1
/8
"
(638) min
FLAT
COUNTERTOP
3
"
(
76) min
TO CONTROL
MODULE
COUNTERTOP CUT-OUT (TOP VIEW)
29
5
/16
"
(745)
INSTALLATION WITH COOKTOP
Installation Specifications
F
or installation of a downdraft system with a cooktop,
refer to the cooktop installation guide for exact cooktop
dimensions, countertop cut-out and cabinet requirements.
The depth of the cooktop will affect the location of the
downdraft in the countertop.
IMPORTANT NOTE: To install a downdraft system and a
Wolf cooktop, you must allow for a minimum 25
1
/8" (638)
flat counter space from front to back. A countertop with a
raised lip or backsplash may not allow enough space for
proper installation. 2
3
/8" (60) of flat countertop is required
behind the cooktop and 1
3
/4" (44) is necessary between
the back edge of the cooktop and inside of cabinet back.
Refer to the illustrations for specifications for a downdraft
model DD30, DD36 or DD45 installed with a Wolf 30" (762)
or 36" (914) cooktop or combination of cooktop and/or
integrated modules.
If downdraft model DD30 is installed in combination with
two integrated modules, an integrated support bracket for
downdraft ventilation is required. The support bracket is
not required for model DD45. Contact your
authorized Wolf dealer for details. To obtain local dealer
information, visit the find a showroom section of our
website, wolfappliance.com.