I N T E G R AT E D R E F R I G E R AT I O N I NSTALLATION I NSTRUCTIONS
CONTENTS Installation Recommendations 3 Installation Specifications 4 Installation Instructions 7 Installation Checklist 18 Service Information 19 Features and specifications indicated herein and on the website are subject to change at any time without notice. Check our website, subzero.com, for the most up-to-date specifications. As you follow these instructions, you will notice WARNING and CAUTION symbols.
I N T E G R AT E D I N S TA L L A T I O N R E C O M M E N D A T I O N S I N S TA L L AT I O N R E C O M M E N D AT I O N S The importance of the installation of the Sub-Zero Integrated unit cannot be overemphasized. Installation should be done by a qualified installer. Before you begin the installation process, it is recommended that you read this entire Installation Instructions book. There are key details that you should take special care to observe during the installation.
I N T E G R AT E D I N S TA L L A T I O N S P E C I F I C A T I O N S OVERALL DIMENSIONS Models 700TR, 700TF(I) and 700TC(I) 27" 24" (686) (UNIT DIMENSION) (610) (UNIT DIMENSION) TOP OF ROUGH OPENING 14"(356) TALL UNITS 13/16" 27" (686) Wide Units (21) 24" Model 700TR All Refrigerator (610) DOOR MOUNTING DETAIL DOOR / DRAWER CLOSED Model 700TF All Freezer Model 700TFI All Freezer with Ice Maker Model 700TC Refrigerator | Freezer Model 700TCI Refrigerator | Freezer with Ice Maker DOOR / DRAWE
I N T E G R AT E D I N S TA L L A T I O N S P E C I F I C A T I O N S OVERALL DIMENSIONS Models 736TR and 736TC(I) 36" 24" (914) (UNIT DIMENSION) (610) (UNIT DIMENSION) TOP OF ROUGH OPENING 14"(356) TALL UNITS 15/16" 36" (914) Wide Units (33) 24" DOOR MOUNTING DETAIL (610) DOOR/DRAWER CLOSED Model 736TR All Refrigerator DOOR/DRAWER CLOSED Model 736TC Refrigerator | Freezer 80"* (2032) 191/2"* 341/2"* (495) 90Ė 3/8" 7713/16"* (10) (1976) Model 736TCI Refrigerator | Freezer with Ice Make
I N T E G R AT E D I N S TA L L A T I O N S P E C I F I C A T I O N S OVERALL DIMENSIONS Models 700BR, 700BF(I) and 700BC(I) 3/8" 27" 24" (686) (UNIT DIMENSION) (610) (UNIT DIMENSION) (10) BASE UNITS Model 700BR All Refrigerator Model 700BF All Freezer Model 700BFI All Freezer with Ice Maker 131/4" 1/2" (337) (13) DRAWER MOUNTING DETAIL 24" (610) 341/2"* 101/4" (876) DRAWER CLOSED (260) 203/8" 93/4" (518) (248) (495) FRONT VIEW Model 700BC Refrigerator | Freezer 191/2"* 4" SIDE VIEW
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S ELECTRICAL R E Q U I R E M E N T S PLUMBING R E Q U I R E M E N T S A 115 V AC, 60 Hz, 15 amp circuit breaker and electrical supply are required. A separate circuit, serving only this appliance, is required for each Integrated unit. For Integrated models with an automatic ice maker, rough in the water supply line. Connect the 1/4" water line from the ice maker water valve to the house water supply.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S PA N E L DESIGN Additional panel design information can be found in the Sub-Zero Design Guide. Check our website at subzero.com. PA N E L C O N S I D E R A T I O N S U N PAC K I N G A N D M OV I N G D O O R A N D D R AW E R PA N E L S Uncrate the unit, remove its wood base and discard the shipping bolts that hold the wood base to the bottom of the unit. Remove all packing materials and tape.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S A N T I - T I P B R AC K E T I N S TA L L A T I O N W O O D F L O O R A P P L I C AT I O N S Use the six #12 x 2 1/2" wood screws and the six 1/4" flat washers provided. Drill pilot holes 3/16" (5) diameter maximum, and be sure that the screws penetrate through the flooring material and into the wall plate a minimum of 3/4" (19). Be sure that the screws hold tight. Refer to illustration 1 below.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S ANTI-TIP B L O C K I N G B R AC K E T POSITION T H E U N I T I N S TA L L C O N C R E T E W E D G E A N C H O R S OPTIONAL COMPONENTS Optional installation components are available through your Sub-Zero dealer. You can also visit our website at subzero.com. For questions relative to the installation, call Sub-Zero at 800-222-7820. 1) Drill a 3/8" (10) diameter hole any depth exceeding the minimum embedment.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S Shut off the power to the electrical outlet. Before moving the Integrated unit into position, tape down the water supply line for the ice maker so it will stay in place as you move the unit. Refer to the Installation illustration for your unit on pages 4ā6 for placement of the water line.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S LEVEL T H E U N I T M O L D I N G I N S TA L L AT I O N Level the Integrated unit by turning the front leveling legs clockwise to raise the unit, or counterclockwise to lower it. To assist you in adjusting the front leveling legs up or down, use a standard screwdriver blade and place it in the front leveling leg as shown in illustration 6 below.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S WAT E R L I N E C O N N E C T I O N Q U I C K C O N N E C T WAT E R VA LV E For units with an ice maker, the quick connect water valve and PEX tubing are located on the right-hand side of the unit towards the bottom. Follow these instructions to connect the ice maker water line. Attach the union fitting to the copper house water supply line.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S PA N E L REQUIREMENTS Door and drawer panels must be a minimum of 5/8" (16) thick. The door panel cannot exceed 40 lbs (18 kg) and each drawer panel must not exceed 12 lbs (5 kg) for 27" (686) wide units. For 36" (914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S P If you have questions, contact your Sub-Zero dealer or cabinet supplier. Additional panel information can be found in the Sub-Zero Design Guide. 23 87 (606) FOR 27" WIDE UNITS 32 87 (835) FOR 36" WIDE UNITS *1167 (37) D O O R PA N E L I N S TA L L AT I O N Remove the two pieces of mounting hardware attached to the front of the door and set aside.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S PA N E L I N S TA L L A T I O N PA N E L REQUIREMENTS Door and drawer panels must be a minimum of 5/8" (16) thick. The door panel cannot exceed 40 lbs (18 kg) and each drawer panel must not exceed 12 lbs (5 kg) for 27" (686) wide units. For 36" (914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel.
I N T E G R AT E D I N S TA L L A T I O N I N S T R U C T I O N S D UA L I N S T A L L A T I O N S To help with the placement of the drawer panels, examine the lower āLā bracket and panel to determine the slotted holes on the bracket that will be used. Then position screws into the lower portion of the drawer that correspond with these slots. Leave these screws out just enough that the slotted holes in the bracket will slide under the heads.
I N S TA L L AT I O N C H E C K L I S T I N S TA L L AT I O N C H E C K L I S T The importance of the installation of the Sub-Zero Integrated unit cannot be overemphasized. Proper installation is the responsibility of the selling dealer or installer. IMPORTANT NOTE: To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked. Advise the homeowner to fill out and return all product registration forms.
S E RV I C E I N F O R M A T I O N S E RV I C E I N F O R M A T I O N If service is necessary, maintain the quality built into your Sub-Zero unit by calling a Sub-Zero authorized service center. To obtain the name and number of a Sub-Zero authorized service center, check the Locator section of our website, subzero.com or call Sub-Zero Customer Service at 800-222-7820. When calling for service, you will need the model and serial number of your unit.
S U B - Z E R O F R E E Z E R C O M PA N Y, I N C . 7002128 6 / 2006 P. O . B O X 4 4 1 3 0 MADISON, WI 53744-4130 800-222-7820 S U B Z E RO.
