Installation Instructions

7004808, 7004809, 7004810, 7004811, 7004812, 7004813, 7012623, 7012624
(Instructions for Dual Grille Kits Listed Above)
7010064 / Rev C / March, 2011
H. Join Units Together at Top
1. Working the Dual Installation Top Bracket in
from the side, line the holes of the top bracket
up with the threaded inserts at the top adjoin-
ing corners of the appliances (See Figure 10).
2. Insert four 5-/16-18 X 3/4” Tensilock Bolts
down through the bracket into the threaded
inserts and tighten the bolts (See Figure 10).
I. Dual Grill Installation Instructions
Note: Both units must be properly installed and lev-
eled, and the production grille assemblies must be
removed before attempting to install the dual grille
assembly. For overlay applications, install grille panel
into grill frame as specified in installation manual at
this time.
1. Install dual grille support bracket over top of
grille installation brackets at adjoining top cor-
ners of the units (See Figure 11). Then, insert
and tighten mounting screws, 2 each side.
2. Attach dual grille slide bracket to top back
center of grille frame using the two #10-
24X1/2” roundhead bolts, two 1/8”X.204 ID
spacers and one dual nut provided
(See Figure 12).
Figure 10. Join Units Together at Top
Page 6 of 7
Figure 11. Install Support Bracket
Figure 12. Dual Grille Slide Bracket Installation