Installation Instructions

7004808, 7004809, 7004810, 7004811, 7004812, 7004813, 7012623, 7012624
(Instructions for Dual Grille Kits Listed Above)
7010064 / Rev C / March, 2011
Figure 7. Both Units Installed
Top View of
Main Frames
with Center
Trim Installed
D. Main Frame Shim Installation
Instructions
NOTE: Shim Assembly MUST
be attached
to back of the left side main frame of the
right hand unit.
1. Remove the left side mainframe from
the right hand unit (See Figure 6).
2. Remove the backing paper from the
double-stick tape that is attached to the
main frame shim.
3. Align the two (2) holes in the shim par-
allel with the two (2) middle main frame
mounting holes, and affix the shim to
the main frame, making sure it is tight to
the bend in the main frame, and that the
holes are NOT
concentrically aligned
with the mounting holes (See Figure 6).
4. Reattach the left side mainframe to the
right hand unit.
E. Install Second Unit to Right of First
Install, level and align unit until its main
frame bumps against flange of center trim
piece and bottom of main frame aligns with
bottom of center trim piece (See Figures 7).
Figure 6. Left Main Frame Off and Shim Application
Left Main Frame
Shim
Top View of Main
Frame and Shim
Page 4 of 7