Installation Instructions

Model BI-36S 10
subzero.com/specs
Cleat Cut Length
PANEL HORIZONTAL VERTICAL
Grille (83" or 84" nished height) 35" (889) None
Grille
(88" nished height) 35" (889) 8" (203)
Refrigerator 19"
(483) 65" (1651)*
Freezer 15"
(381) 65" (1651)*
*No cut required.
1
/
2
"
(13)
GRILLE PANEL
36"
(914)
9
1
/4"
(235)
69
3
/
4
"
(1772)
20
1
/16"
(510)
15
11
/16"
(398)
FREEZER
PANEL
REFRIGERATOR
PANEL
(FRONT OF
PANELS)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
1
/8" (3)
1
/8" (3)
1
/8" (3)
1
/8" (3)
OVERLAY PANELS
1
/
2
"
(13)
GRILLE PANEL
37"
(940)
9
1
/4"
(235)
69
3
/
4
"
(1772)
20
9
/16"
(522)
16
3
/16"
(411)
FREEZER
PANEL
REFRIGERATOR
PANEL
(FRONT OF
PANELS)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
5
/8" (16)
5
/8" (16)
1
/8" (3)
1
/8" (3)
FLUSH INSET PANELS
Flush inset panel dimensions and mounting cleat offsets. Overlay panel dimensions and mounting cleat offsets.
Model BI-36S
SINGLE INSTALLATION
The illustrations below provide panel dimensions and
mounting cleat offsets for overlay and ush inset panels.
Check dimensions of actual panels against the illustration
for your panel application.
IMPORTANT NOTE: Panels are viewed from the front to
show nished elevation. Cleats will be attached to the
back of the panels.
Grille panel dimensions shown are for standard 84"
(2134)
nominal nished height of unit. Grille panel will be 1"
(25)
shorter for 83" (2108) nished height and 4" (102) taller for
88"
(2235) nished height.
Cut mounting cleats to length according to the chart. Cut
lengths will be the same for overlay and ush inset panels.
Horizontal cleats for panel bottoms should be cut to include
as many holes as possible. Refer to page 4 for mounting
instructions.
Mounting cleat offset detail.
OFFSET GAGE
CLEAT
PANEL
OFFSET
(OFFSET PROVIDED IN
PANEL ILLUSTRATION)