Installation Instructions

Model BI-42S / BI-42SID / BI-42SD 11
Cleat Cut Length
PANEL HORIZONTAL VERTICAL
Grille (83" or 84" nished height) 41" (1041) None
Grille
(88" nished height) 41" (1041) 8" (203)
Refrigerator 24"
(610) 65" (1651)*
Freezer 16"
(406) 65" (1651)*
*No cut required.
1
/
2
"
(13)
42"
(1067)
9
1
/4"
(235)
69
3
/
4
"
(1772)
25
1
/16"
(637)
16
11
/16"
(424)
FREEZER
PANEL
REFRIGERATOR
PANEL
(FRONT OF PANELS)
1
/4" (6)
GRILLE PANEL
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
1
/8" (3)
1
/8" (3)
1
/8" (3)
1
/8" (3)
OVERLAY PANELS
1
/
2
"
(13)
43"
(1092)
9
1
/4"
(235)
69
3
/
4
"
(1772)
25
9
/16"
(649)
17
3
/16"
(437)
FREEZER
PANEL
REFRIGERATOR
PANEL
(FRONT OF PANELS)
1
/4" (6)
GRILLE PANEL
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
1
/8" (3)
1
/8" (3)
5
/8" (16)
5
/8" (16)
FLUSH INSET PANELS
Flush inset panel dimensions and mounting cleat offsets. Overlay panel dimensions and mounting cleat offsets.
Model BI-42S / BI-42SID / BI-42SD
SINGLE INSTALLATION
The illustrations below provide panel dimensions and
mounting cleat offsets for overlay and ush inset panels.
Check dimensions of actual panels against the illustration
for your panel application.
IMPORTANT NOTE: Panels are viewed from the front to
show nished elevation. Cleats will be attached to the
back of the panels.
Grille panel dimensions shown are for standard 84"
(2134)
nominal nished height of unit. Grille panel will be 1"
(25)
shorter for 83" (2108) nished height and 4" (102) taller for
88"
(2235) nished height.
Cut mounting cleats to length according to the chart. Cut
lengths will be the same for overlay and ush inset panels.
Horizontal cleats for panel bottoms should be cut to include
as many holes as possible. Refer to page 4 for mounting
instructions.
Mounting cleat offset detail.
OFFSET GAGE
CLEAT
PANEL
OFFSET
(OFFSET PROVIDED IN
PANEL ILLUSTRATION)