Installation Instructions

Model BI-36U—Dual Installation 17
subzero.com/specs
1
/2"
(13)
5
/8"
(16)
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
GRILLE PANEL
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
GRILLE PANEL
1
/4" (6)
36" (914)36" (914)
9
1
/4"
(235)
50
1
/8"
(1273)
19"
(483)
5
/32"
(4)
3
/32"
(2)
3
/
32
"
(2)
5
/32"
(4)
5
/32"
(4)
5
/32"
(4)
1
/8" (3)
1
/8" (3)
1
/8" (3)
1
/8" (3)
OVERLAY PANELS
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
GRILLE PANEL
REFRIGERATOR PANEL
(FRONT OF PANELS)
FREEZER PANEL
GRILLE PANEL
9
1
/4"
(235)
50
1
/8"
(1273)
19"
(483)
36
1
/
2
" (927)36
1
/
2
" (927)
1
/2"
(13)
5
/8"
(16)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
5
/32"
(4)
5
/32"
(4)
5
/8" (16)
1
/8" (3)
5
/8" (16)
1
/8" (3)
FLUSH INSET PANELS
Model BI-36U—Dual Installation
SEPARATE GRILLES
The illustrations below provide panel dimensions and
mounting cleat offsets for overlay and ush inset panels.
Check dimensions of actual panels against the illustration
for your panel application.
IMPORTANT NOTE: Panels are viewed from the front to
show nished elevation. Cleats will be attached to the
back of the panels.
Grille panel dimensions shown are for standard 84"
(2134)
nominal nished height of unit. Grille panel will be 1"
(25)
shorter for 83" (2108) nished height and 4" (102) taller for
88"
(2235) nished height.
Cut mounting cleats to length according to the chart. Cut
lengths will be the same for overlay and ush inset panels.
Horizontal cleats for panel bottoms should be cut to include
as many holes as possible. Refer to page 4 for mounting
instructions. Dual installations require two mounting kits.
Flush inset panel dimensions and mounting cleat offsets. Overlay panel dimensions and mounting cleat offsets.
Cleat Cut Length
PANEL HORIZONTAL VERTICAL
Grille (83" or 84" nished height) 35" (889) None
Grille
(88" nished height) 35" (889) 8" (203)
Refrigerator 35"
(889) 45
1
/2" (1156)
Freezer 35"
(889) 14" (356)
Mounting cleat offset detail.
OFFSET GAGE
CLEAT
PANEL
OFFSET
(OFFSET PROVIDED IN
PANEL ILLUSTRATION)