Installation Instructions

Model BI-36UFD 8
1
/2"
(13)
5
/8"
(16)
FREEZER PANE L
(FRONT OF PANELS)
GRILLE PANEL
36" (914)
9
1
/4"
(235)
50
1
/8"
(1273)
19"
(483)
REFRIGERA-
TOR PANEL
REFRIGERA-
TOR PANEL
17
7
/8"
(454)
17
7
/8"
(454)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
5
/32"
(4)
5
/32"
(4)
1
/
8
" (3)
1
/
8
" (3)
1
/8" (3)
1
/8" (3)
OVERLAY PANELS
1
/2"
(13)
5
/8"
(16)
FREEZER PANE L
(FRONT OF PANELS)
GRILLE PANEL
37" (940)
9
1
/4"
(235)
50
1
/8"
(1273)
19"
(483)
REFRIGERA-
TOR PANEL
REFRIGERA-
TOR PANEL
18
3
/8"
(467)
18
3
/8"
(467)
1
/4" (6)
5
/32"
(4)
3
/32"
(2)
3
/32"
(2)
5
/32"
(4)
5
/32"
(4)
5
/32"
(4)
5
/
8
" (16)
5
/
8
" (16)
1
/8" (3)
1
/8" (3)
FLUSH INSET PANELS
Flush inset panel dimensions and mounting cleat offsets. Overlay panel dimensions and mounting cleat offsets.
Cleat Cut Length
PANEL HORIZONTAL VERTICAL
Grille (83" or 84" nished height) 35" (889) None
Grille
(88" nished height) 35" (889) 8" (203)
Refrigerator (2 panels) 17"
(432) 45
1
/2" (1156)
Freezer 35"
(889) 14" (356)
Model BI-36UFD
SINGLE INSTALLATION
The illustrations below provide panel dimensions and
mounting cleat offsets for overlay and ush inset panels.
Check dimensions of actual panels against the illustration
for your panel application.
IMPORTANT NOTE: Panels are viewed from the front to
show nished elevation. Cleats will be attached to the
back of the panels.
Grille panel dimensions shown are for standard 84"
(2134)
nominal nished height of unit. Grille panel will be 1"
(25)
shorter for 83" (2108) nished height and 4" (102) taller for
88"
(2235) nished height.
Cut mounting cleats to length according to the chart. Cut
lengths will be the same for overlay and ush inset panels.
Horizontal cleats for panel bottoms should be cut to include
as many holes as possible. Refer to page 4 for mounting
instructions.
Mounting cleat offset detail.
OFFSET GAGE
CLEAT
PANEL
OFFSET
(OFFSET PROVIDED IN
PANEL ILLUSTRATION)