Manualshelf

Installation Instructions

ManualsBrandsSub-Zero ManualsAccessoriesStainless Steel Flush Inset Refrigerator Door Panel with Pro Handle
1234
1
2
3
DOOR
HANDLE-SIDE TRIM
SCREWS
SCREW COVER
METAL FRONT
PANEL
Figure 4. Door Metal Front Panel Installation
Metal Front Panels
7004566 / Rev A / February, 2008
Page 2 of 4
DOOR HANDLE-SIDE TRIM REMOVAL PROCEDURE:
1. At the top of the door, insert a flat blade screwdriver into the channel of the screw cover and push the cover
away form the handle-side trim so that it disengages from the handle-side trim (See Figure 2).
2. With a T-20, 6-lobe Torx type bit, extract the handle-side mounting screws and pull the trim from the door
(See Figure 3).
Figure 2. Screw Cover Removal
Figure 3. Handle-Side Trim Removal
DOOR
SCREW COVER
HANDLE-SIDE TRIM
HANDLE-SIDE TRIM
DOOR PANEL INSTALLATION PROCEDURE (See Figure 4):
1. Install the door front panel onto the door so that the panel clips slide under the door trim and the front panel
slides in over the door trim.
22. Reattach the handle-side trim.
3. Reinstall the screw cover.