User Guide

10
WOLF GAS BBQ GRILLS
IMPORTANT
NOTE
You must follow
all National
Electrical Code
regulations. In
addition, be aware
of local codes and
ordinances when
installing your
service.
ELECTRICAL REQUIREMENTS
IMPORTANT NOTE: This appliance must be
properly grounded to avoid shock hazard.
In applications where there is a rear wall
b
ehind the BBQ grill, locate the electrical
service on the left hand side for the rotisserie
motor. The rotisserie motor requires a 110/120
V
AC supply. The 6' (1.8 m) power supply cord
on the motor is equipped with a 3-prong
grounding plug. To minimize possible shock
hazard, the cord must be plugged into a
mating 3-prong ground-type outlet, grounded
to conform with the National Electrical Code,
ANSI/NFPA 70 latest edition, or Canadian Elec-
trical Code (CSA) and all local codes and ordi-
nances. Refer to the illustration below.
Do not cut or remove the grounding prong
from the plug.
Grounding Plug
Grounding-Type
Electrical Outlet
Electrical ground
IMPORTANT NOTE: You must have a properly
grounded, 3-prong outlet installed by a
q
ualified electrician.
I
MPORTANT NOTE:
D
o not ground to a gas
pipe.
IMPORTANT NOTE: Keep the power supply
cord and fuel hose away from hot surfaces.