User Guide

5
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION INSTRUCTIONS
INSTALLATION CONSIDERATIONS
Safe and satisfactory operation of your Wolf
BBQ grill depends upon its proper installation.
T
he installation, adjustments and service of
this grill must be performed by a qualified
installer, service agency or gas supplier. This
i
s necessary to ensure proper operation and
avoid accidents which may occur through
misuse of the BBQ grill.
All minimum clearances to combustible
surfaces must be observed.
Be sure the appliance is properly grounded to
avoid shock hazard.
You must follow all National Electrical Code
and gas regulations. In addition, be aware of
local code or ordinances when installing your
service.
ACCESSORIES
Optional acces-
sories are available
through your
Wolf dealer. To
obtain local dealer
information, visit
the Locator section
of our website,
wolfappliance.com.
COMBUSTIBLE SURFACES
BUILT-IN MINIMUM CLEARANCES
A
minimum of 18" (457) from the sides and 18"
(457) from the back required above and below
the cooking surface to adjacent vertical
c
ombustible surfaces. A minimum of 6" (152)
to the side is required for space for the rotis-
serie motor.
Refer to the Overall Dimensions illustration for
your specific model on pages 6–7. For exact
rough opening dimensions, refer to the
Installation Specifications illustration for your
specific installation on pages 8–9.
IMPORTANT NOTE: The optional insulated
liner is necessary when the BBQ grill is to be
placed into a combustible enclosure. Use only
the approved insulated liner which has been
specifically designed and tested for this
purpose, available through your Wolf dealer.
Failure to locate the BBQ grill without
the pr
oper clearances will result in a fire
hazard.