Design Guide

subzero.com | 75
H
H
W
AA
A
A
BW-30
FLUSH INSET PANELS
DOOR W H
Flush Inset Panel 31" (787) 69⁄" (1772)
Spacer Panel 29⁄" (740) 68⁄" (1751)
Backer Panel 29⁄" (756) 69⁄" (1767)
GRILLE W H
Flush Inset Panel 31" (787) 9⁄" (235)
Spacer Panel 29⁄" (740) 8⁄" (211)
Backer Panel 29⁄" (756) 8⁄" (227)
STILES / RAILS A
Minimum 3⁄" (95)
Grille panel dimensions are for standard 84" (2134) overall unit height.
For 83"
(2108) height, subtract 1" (25) from grille panel height dimen-
sions and for 88"
(2235) height, add 4" (102). A specific panel grille
must be ordered for an 83" or 88" overall unit height.
Wine Storage
Custom Panel—BW-30
FLUSH INSET
The flush inset application is an overlay model with flush
inset panels. It is not a separate model.
The flush inset design allows custom panels to be installed
flush with adjacent cabinets. Similar to overlay, flush inset
panels are typically created by combining a ⁄"
(19) custom
panel, a .10"
(3) spacer panel, and a ⁄" (6) backer panel.
Refer to the illustrations for overlay panels on the previous
page.
For flush inset panels thicker than ⁄"
(19), a 90° door stop
may be required to prevent interference with adjacent
cabinets. Refer to the full-scale template on page 85.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
Door 75 lb (34 kg)
Grille 13 lb (6 kg)
PANEL THICKNESS MIN
Flush Inset ⁄" (16)
FLUSH INSET PANEL DIMENSIONS