installation instructions

subzero.com | 3
Product Information
Important product information including the model and
serial number of the unit are listed on the product rating
plate. The rating plate is located at the top frame of the unit,
inside the door. Refer to the illustration below.
If service is necessary, contact Sub-Zero factory certied
service and have the model and serial number of the unit.
For the name of the nearest Sub-Zero factory certied
service or for questions regarding the installation, visit the
contact & support section of our website, subzero.com or
call Sub-Zero customer care at 800-222-7820.
BUILT-IN REFRIGERATION
Tools and Materials
t Screwdrivers—standard and Phillips.
t Power drill.
t Drill bits (masonry bits required for concrete installation).
t Torx drives—T-10, 15 and 20.
t Standard Allen wrench set.
t Standard socket and wrench set.
t 2' and 4' levels.
t Tubing cutter.
t 3' of
1
/4" OD copper, braided stainless steel or PEX
tubing.
t Saddle valve.
t Material to protect home, ooring and cabinetry during
installation.
Rating plate location.
RATING
PLATE