Design Guide
50
|
Sub-Zero Customer Care 800.222.7820
INTEGRATED REFRIGERATION
Opening Dimensions
INTEGRATED
25"
(635)
OPENING
DEPTH
W
OPENING WIDTH
H
OPENING
HEIGHT
NOTE:
3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
SIDE
VIEW
TOP VIEW
FRONT VIEW
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS CABINETRY
3
/4"
(19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
FILLER
FRAMED CABINETRY
W W
OPENING DIMENSIONS
COLUMN | TALL W* H
18" Column 18" (457) 84" (2134)
24" Column 24" (610) 84" (2134)
30" Column | Tall 30" (762) 84" (2134)
36" Column | Tall 36" (914) 84" (2134)
DRAWER W* H
24" Drawer 24" (610) 34
1
/2" (876)
27" Drawer 27" (686) 34
1
/2" (876)
30" Drawer 30" (762) 34
1
/2" (876)
36" Drawer 36" (914) 34
1
/2" (876)
*For stainless steel side panel accessory, add 1" (25) per panel to opening width.
The depth of each integrated model is 24" (610). Allow for
panel thickness when planning the nished opening depth.
A minimum 3
1
/2" (89) nished return is required on all sides
of the opening. Framed cabinets will require additional
nished ller material behind the face frame for a proper
installation. Refer to the illustration.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit will be required for this instal-
lation. If a dual installation kit is not specied, a minimum
2"
(51) ller strip is required between units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
UNDERCOUNTER WINE INTEGRATED PRO 48 BUILT-IN