Sub-Zero Design Guide REVISED 10 / 2015
Contents 3 Built-In Refrigeration 38 PRO 48 Refrigeration 44 Integrated Refrigeration 54 Wine Storage 84 Undercounter Refrigeration 94 Sub-Zero Warranties Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified.
BUILT-IN REFRIGERATION BUILT-IN Built-In Refrigeration Energy efficient; many models are ENERGY STAR® qualified. • Advanced water filtration and air purification systems. • NEW! French door models requires less space for door clearance to accommodate virtually any-size kitchen. • Four distinct design approaches: framed, overlay, flush inset and stainless steel. NEW! Internal dispenser models provide chilled water inside the refrigerator—some models also dispense ice.
BUILT-IN BUILT-IN REFRIGERATION PRO 48 Built-In Design Options FRAMED OVERLAY For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed application is an overlay model with framed design features. Panel, grille and handle options are available. Custom overlay door panels can be combined with unique handle hardware for design flexibility. Shown with pro handle option to complement Wolf ranges.
BUILT-IN REFRIGERATION BUILT-IN Built-In Design Options FLUSH INSET STAINLESS STEEL The flush inset design option allows for flush door and grille panels and custom handle hardware. Shown with tubular handle option to match Wolf built-in ovens. The flush inset application is an overlay model with flush inset panels. Customize with panel, grille and handle options. For a professional look, classic stainless steel models require no customization.
BUILT-IN BUILT-IN REFRIGERATION Overall Dimensions ALL REFRIGERATOR / ALL FREEZER 26 3/16" (665) PRO 48 36" (914) 84" (2134) 73 3/4" INTEGRATED (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 14 1/8" (359) 37 1/4" WINE (946) 2 3/8" (60) UNDERCOUNTER Model BI-36R, BI-36RG and BI-36F. 6 | Sub-Zero Customer Care 800.222.7820 23 7/8" (606) Overall dimensions are based on stainless steel models. For flush inset applications, add 1/2" (13) to door clearance dimensions.
BUILT-IN REFRIGERATION BUILT-IN Overall Dimensions OVER-AND-UNDER 26 3/16" (665) 30" (762) 84" (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" (584) (584) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" (606) 23 7/8" 23 7/8" (606) (606) 12 1/8" (308) (600) 4" (102) INTEGRATED 4" (102) PRO 48 84" (2134) HEIGHT DIMENSIONS ± 1/2" (13) 23 5/8" 26 3/16" (665) 36" (914) 14 1/8" (359) 311/4" (796) 23 5/8" (600) 37 1/4" (946) WINE 2 3/8" (60) 2 3/8" (60) Model BI-30U and BI-30U
BUILT-IN BUILT-IN REFRIGERATION Overall Dimensions OVER-AND-UNDER 26 3/16" (665) INTEGRATED PRO 48 36" (914) 26 3/16" (665) 42" (1067) 84" 84" (2134) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" (584) (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" 23 7/8" (606) (606) 8" 9" (203) (229) 23 5/8" 191/2" 23 5/8" (495) (600) (600) 221/4" WINE (565) 2 3/8" (60) UNDERCOUNTER Model BI-36UFD(ID).
BUILT-IN REFRIGERATION BUILT-IN Overall Dimensions SIDE-BY-SIDE 26 3/16" (665) 36" (914) 26 3/16" (665) 42" (1067) 84" (2134) 73 3/4" 73 3/4" (1873) (1873) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) (606) (606) 7 1/2" (191) 8 3/4" (222) 23 7/8" (606) 23 7/8" 23 7/8" 7 1/4" (184) INTEGRATED HEIGHT DIMENSIONS ± 1/2" (13) PRO 48 84" (2134) 10 3/8" (264) 221/4" 26 1/4" (565) (668) WINE 2 3/8" (60) 2 3/8" (60) Model BI-36S. Model BI-42S, BI-42SID and BI-42SD.
BUILT-IN BUILT-IN REFRIGERATION Overall Dimensions SIDE-BY-SIDE 26 3/16" (665) PRO 48 48" (1219) 84" (2134) 73 3/4" INTEGRATED (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 8 3/8" (213) 11 5/8" (295) 30" WINE (762) 2 3/8" (60) UNDERCOUNTER Model BI-48S, BI-48SID and BI-48SD. 10 | Sub-Zero Customer Care 800.222.
BUILT-IN REFRIGERATION BUILT-IN Specifications BUILT-IN INTERIOR CAPACITY ALL REFRIGERATOR / ALL FREEZER BI-36R BI-36RG BI-36F SHIPPING WEIGHT R CU FT (L) F CU FT (L) 23.5 (665) 23.4 (663) 22.7 (643) ALL REFRIGERATOR / ALL FREEZER BI-36R BI-36RG BI-36F 4.2 (119) 4.2 (119) 5.3 (150) 5.3 (150) 5.3 (150) 6.4 (181) BI-30U BI-30UG BI-36U(ID) BI-36UG BI-36UFD(ID) BI-42UFD(ID) SIDE-BY-SIDE R CU FT (L) F CU FT (L) SIDE-BY-SIDE 12.4 (351) 16.3 (462) 15.8 (447) 16.0 (453) 19.1 (541) 18.6 (527) 18.
BUILT-IN BUILT-IN REFRIGERATION Opening Dimensions STANDARD INSTALLATION PRO 48 24" (610) OPENING DEPTH INTEGRATED TOP VIEW 83 3/4" W (2127) OPENING HEIGHT OPENING WIDTH WINE SIDE VIEW FRONT VIEW NOTE: Shaded line represents profile of unit. OPENING WIDTH MODEL UNDERCOUNTER 30" Model 36" Model 42" Model 48" Model 12 | Sub-Zero Customer Care 800.222.
BUILT-IN REFRIGERATION BUILT-IN Opening Dimensions FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) PRO 48 FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) W FLUSH INSET WIDTH INTEGRATED 84" (2134) FLUSH INSET HEIGHT 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW WINE *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 3/4" (19) panel.
BUILT-IN BUILT-IN REFRIGERATION Opening Dimensions DUAL STANDARD INSTALLATION PRO 48 24" (610) OPENING DEPTH INTEGRATED TOP VIEW 83 3/4" W (2127) OPENING HEIGHT OPENING WIDTH WINE SIDE VIEW FRONT VIEW NOTE: Shaded line represents profile of unit. A dual installation kit will be required for this installation. DUAL OPENING WIDTH MODELS UNDERCOUNTER Two 30" Models 30" and 36" Models Two 36" Models 14 | Sub-Zero Customer Care 800.222.
BUILT-IN REFRIGERATION BUILT-IN Opening Dimensions DUAL FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) PRO 48 FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) W FLUSH INSET WIDTH INTEGRATED 84" (2134) FLUSH INSET HEIGHT 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW WINE *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 3/4" (19) panel.
BUILT-IN BUILT-IN REFRIGERATION Electrical Plumbing The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below.
BUILT-IN REFRIGERATION BUILT-IN Custom Panels For framed, overlay and flush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay and flush inset applications. Refer to panel requirements below and the charts on pages 20–25 for custom panel dimensions for your specific design application. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
BUILT-IN BUILT-IN REFRIGERATION PRO 48 Custom Panels PARTIAL FRAMED OPTION PANEL MOUNTING KIT The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
BUILT-IN REFRIGERATION BUILT-IN Custom Panels FLUSH INSET PANELS ICE AND WATER DISPENSER The flush inset application is an overlay model with flush inset panels. It is not a separate model. For models BI-42SD and BI-48SD, the refrigerator door panel must include a cut-out to accommodate the external dispenser. The thickness of the panel in this area can range from 1/4" (6) to a maximum of 1 1/8" (29). Refer to the illustrations below.
BUILT-IN BUILT-IN REFRIGERATION Framed Panel Dimensions H H H A A A H H A PRO 48 H H H H H A A W A H W H H B W BI-36R, BI-36F W W BI-36RG BI-30U, BI-36U(ID) INTEGRATED MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel BI-36RG Stiles / Rails W BI-30UG, BI-36UG W BI-36UFD(ID), BI-42UFD(ID) MODEL BI-36U(ID), BI-36UG W H 35 3/4" (908) 69 9/16" (1767) W H 35 3/4" (908) 8 15/16" (227) A B 5 3/16" (132) 10 5/16" (262)
BUILT-IN REFRIGERATION BUILT-IN Framed Panel Dimensions H H H H PRO 48 A B W W BI-36S, BI-42S, BI-42SID, BI-48S, BI-48SID W W BI-42SD, BI-48SD MODEL BI-36S MODEL BI-48S, BI-48SID, BI-48SD Door Panel W H 19 13/16" (503) 69 9/16" (1767) FREEZER Door Panel W H 15 7/16" (392) 69 9/16" (1767) GRILLE (OPTIONAL) Grille Panel W H 35 3/4" (908) 8 15/16" (227) REFRIGERATOR Door Panel FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel BI-48SD Dispenser Cut-Out* MODEL BI-42S, BI-42S
BUILT-IN BUILT-IN REFRIGERATION Overlay Panel Dimensions H H H A A A H H A PRO 48 H H H H H A A W A H W H H B W BI-36R, BI-36F W W BI-36RG BI-30U, BI-36U(ID) INTEGRATED MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W BI-30UG, BI-36UG W BI-36UFD(ID), BI-42UFD(ID) MODEL BI-36U(ID), BI-36UG W H 36" (914) 35 1/8" (892) 35 3/4" (908) 69 3/4" (1772) 68 15/
BUILT-IN REFRIGERATION BUILT-IN Overlay Panel Dimensions H MODEL BI-42S, BI-42SID, BI-42SD H REFRIGERATOR Overlay Panel Spacer Panel Backer Panel H H BI-36S, BI-42S, BI-42SID, BI-48S, BI-48SID W W H 16 11/16" (424) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE Overlay Panel Spacer Panel Backer Panel W W H 42" (1067) 41 1/8" (1045) 41 3/4" (1060) 9 1/4" (235)* 8 5/16" (211) 8 15/16" (227) BI-42SD BI-42SD, BI-48SD Dispenser Cut-Out Cut-Out Locatio
BUILT-IN BUILT-IN REFRIGERATION Flush Inset Panel Dimensions H H H A A A H A H PRO 48 H H H H H B A W B H W H H B W W BI-36R, BI-36F W BI-36RG BI-30U, BI-36U(ID) INTEGRATED MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W BI-30UG, BI-36UG W BI-36UFD(ID), BI-42UFD(ID) MODEL BI-36U(ID), BI-36UG W H 37" (940) 35 1/8" (892) 35 3/4" (908) 69 3/4" (
BUILT-IN REFRIGERATION BUILT-IN Flush Inset Panel Dimensions H MODEL BI-42S, BI-42SID, BI-42SD H REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel H H BI-36S, BI-42S, BI-42SID, BI-48S, BI-48SID W W H 17 3/16" (437) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE Flush Inset Panel Spacer Panel Backer Panel W W H 43" (1092) 41 1/8" (1045) 41 3/4" (1060) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) DISPENSER (BI-42SD) BI-42SD, BI-48SD Dispenser C
BUILT-IN BUILT-IN REFRIGERATION Flush Inset Panels PANEL OFFSET TOP VIEW TOP VIEW The illustrations provide panel offsets and reveals for built-in models in a flush inset application. Refer to the chart below for reference to the illustrations.
BUILT-IN REFRIGERATION BUILT-IN Dual Installation For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 20–23. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. PRO 48 If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit.
BUILT-IN BUILT-IN REFRIGERATION Dual Flush Inset Panel Dimensions H H H H A A A H A H PRO 48 H B A H B H H B W W BI-36R, BI-36F W BI-36RG BI-30U, BI-36U(ID) INTEGRATED MODEL BI-36R, BI-36RG, BI-36F W H 36 1/2" (927) 35 1/8" (892) 35 3/4" (908) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE Flush Inset Panel Spacer Panel Backer Panel W H 36 1/2" (927) 35 1/8" (892) 35 3/4" (908) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) BI-36RG Stiles / Rails BI-30UG, BI-36UG M
BUILT-IN REFRIGERATION BUILT-IN Dual Installation DUAL FLUSH INSET PANEL OFFSET TOP VIEW The illustrations provide panel offsets and reveals for built-in models in a dual flush inset application. Refer to the chart below for reference to the illustrations.
BUILT-IN BUILT-IN REFRIGERATION Dual Installation DUAL WIDE GRILLE DUAL WIDE GRILLE—FLUSH INSET A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. TWO 30" MODELS W H Flush Inset Panel Spacer Panel Backer Panel 61 1/4" (1556) 59 3/8" (1508) 60" (1524) 9 1/4" (235) 8 5/16" (211) 8 15/16" (227) PRO 48 For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below.
BUILT-IN REFRIGERATION BUILT-IN Standard Handles The custom side panels must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
BUILT-IN BUILT-IN REFRIGERATION Framed Panels PRO 48 FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE INTEGRATED STANDARD FULL-LENGTH HANDLE 1" 2" 3" (25) (51) (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL WINE 1/4" (6) FRAMED PANEL DOOR UNDERCOUNTER Framed panel thickness. 32 | Sub-Zero Customer Care 800.222.
BUILT-IN REFRIGERATION BUILT-IN Overlay and Flush Inset Panels FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. PRO 48 DEPTH OF TUBULAR AND PRO HANDLES 2" 3" (51) (76) INTEGRATED 1" (25) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .
BUILT-IN BUILT-IN REFRIGERATION Overlay Application FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT PRO 48 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) INTEGRATED 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) WINE 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER UNDERCOUNTER PANEL 0" 1" (25) SCALE 90° door opening (top view). 34 | Sub-Zero Customer Care 800.222.
BUILT-IN REFRIGERATION BUILT-IN Flush Inset Application FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) PRO 48 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS INTEGRATED WINE 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) UNDERCOUNTER SCALE 110° door opening (top view). subzero.
BUILT-IN BUILT-IN REFRIGERATION PRO 48 FILLER STRIP 11/4" (32) DOOR CLOSED WINE INTEGRATED APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation FULL-SCALE TEMPLATE Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. UNDERCOUNTER 0" 1" (25) SCALE Dual standard installation (top view). 36 | Sub-Zero Customer Care 800.222.
BUILT-IN REFRIGERATION BUILT-IN FILLER STRIP PRO 48 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE DOOR CLOSED INTEGRATED WINE Dual Flush Inset Installation DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) UNDERCOUNTER SCALE Dual flush inset installation (top view). subzero.
PRO 48 REFRIGERATION BUILT-IN PRO 48 Refrigeration KEY FEATURES Can be used freestanding or installed as a standard or flush built-in application. • Stainless steel interior as well as exterior. • Handles coordinate with handles of Wolf ranges. • Dual refrigeration system enhanced with triple evaporators allow independent control of storage conditions in refrigerator cabinet and drawer compartments. • Advanced water filtration system.
BUILT-IN PRO 48 REFRIGERATION Overall Dimensions PRO 48 25 7/8" (657) PRO 48 48" (1219) 84" (2134) 42 1/8" (1070) 30 1/2" INTEGRATED (775) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 30 3/16" (767) 23 7/8" (606) 14 1/2" (368) 21" (533) 30 3/4" WINE (781) SPECIFICATIONS INTERIOR CAPACITY R CU FT (L) F CU FT (L) 648PRO, 648PROG 18.4 (521) 11.7 (331) SHIPPING WEIGHT 2 3/8" (60) UNDERCOUNTER Model 648PRO and 648PROG. 40 | Sub-Zero Customer Care 800.222.
PRO 48 REFRIGERATION BUILT-IN Opening Dimensions STANDARD AND FLUSH INSTALLATION D OPENING DEPTH PRO 48 TOP VIEW W OPENING WIDTH SIDE VIEW INTEGRATED H OPENING HEIGHT FRONT VIEW WINE OPENING DIMENSIONS INSTALLATION Standard Flush W H D 47 1/2" (1206) 48" (1219) 83 3/4" (2127) 84 1/8" (2137) 24" (610) 26" (660) For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry.
BUILT-IN PRO 48 REFRIGERATION Electrical Plumbing The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below.
PRO 48 REFRIGERATION BUILT-IN Standard Handles Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for PRO 48 models. PRO 48 HANDLE LENGTH PRO 48 Door Refrigerator Drawer Freezer Drawer TUBULAR PRO NA NA NA 27 11/16" (703) 19 15/16" (506) 11 9/16" (294) INTEGRATED WINE UNDERCOUNTER subzero.
INTEGRATED REFRIGERATION BUILT-IN Integrated Refrigeration With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen. KEY FEATURES Custom front panels and hardware allow for infinite design options.
BUILT-IN INTEGRATED REFRIGERATION Specifications Overall Dimensions COLUMN INTERIOR CAPACITY PRO 48 COLUMN IC-18FI IC-24R IC-24FI IC-30R(ID) IC-30FI IC-36R(ID) TALL ID-24R ID-24F(I) ID-27R ID-30R(P) ID-30F(I) ID-30C(I) ID-36R(P) ID-36C(I) 8.4 (238) W 24" (610) 4 1/2" (114) 12.3 (348) 17.3 (490) 15.3 (433) 21.4 (606) F CU FT (L) 16.5 (467) 10.6 (300) 20.5 (580) 13.3 (377) R CU FT (L) 15.1 (428) 5.0 (142) 84"* 69 1/2" (2134) (1765) 6.4 (181) F CU FT (L) 4.0 (113) 3.8 (108) 4.6 (130) 5.
INTEGRATED REFRIGERATION BUILT-IN Overall Dimensions TALL DRAWER W 24" (610) W 24" (610) 1/4" (6) 4 1/2" (114) 13 5/16" (338) (876) 84"* 44 7/8" (2134) (1140) 3/8" (10) PRO 48 34 1/2"* 10 9/16" (268) 3 5/8" (92) *34" (864) MIN TO 35" (889) MAX 3/8" (10) 13 5/16" (338) 3/8" (10) INTEGRATED 10 9/16" (268) 18 3/8" (467) 3 5/8" (92) *83 1/2" (2121) MIN TO 84 1/2" (2146) MAX DRAWER A MODEL 13/4" (45) 24" Drawer 27" Drawer 30" Drawer 36" Drawer W 24" (610) 27" (686) 30" (762) 36" (914
BUILT-IN INTEGRATED REFRIGERATION Opening Dimensions INTEGRATED OPENING DIMENSIONS COLUMN AND TALL 18" Column 24" Column 30" Column and Tall 36" Column and Tall PRO 48 25" (635) OPENING DEPTH DRAWER TOP VIEW H 84" (2134) 84" (2134) 84" (2134) 84" (2134) W H 24" (610) 27" (686) 30" (762) 36" (914) 34 1/2" (876) 34 1/2" (876) 34 1/2" (876) 34 1/2" (876) INTEGRATED The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth.
INTEGRATED REFRIGERATION BUILT-IN Electrical Plumbing The electrical supply must be located within the shaded area shown in the illustration and chart below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below.
BUILT-IN INTEGRATED REFRIGERATION Custom Panels PRO 48 For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. TYPICAL PANEL DIMENSIONS The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 24" (610).
INTEGRATED REFRIGERATION BUILT-IN Custom Panels TOE KICK CLEARANCE The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 2" (51) to 3 7/8" (98) require a reduced toe kick accessory available through an authorized Sub-Zero dealer.
BUILT-IN INTEGRATED REFRIGERATION Standard Handles Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. PRO 48 Refer to the chart below for standard handle lengths for integrated models.
INTEGRATED REFRIGERATION BUILT-IN Maximum Door Opening FULL-SCALE TEMPLATE As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by utilizing the 90° door stop. PRO 48 3/4" (19) PANEL DOOR OPEN MAXIMUM 105° 1/8" (3) REVEAL INTEGRATED POTENTIAL INTERFERENCE DOOR CLOSED 3/4" (19) PANEL ADJACENT CABINETRY WINE POTENTIAL INTERFERENCE 0" 1" (25) UNDERCOUNTER SCALE Maximum door opening (top view). subzero.
WINE STORAGE BUILT-IN Wine Storage Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home. 424FSG IW-18 IW-24 IW-30 • Full-view glass door standard on all models. • Discreet interior lighting with illuminated display rack for prized bottles of wine.
BUILT-IN WINE STORAGE Overall Dimensions MODEL 315W MODEL 424G PRO 48 15 1/8" (384) 23 7/8" (606) 24" (610) 341/16" 34" (865) (864) 4" (102) INTEGRATED 24" (610) 4" (102) 16 5/8" (422) 25 3/8" (645) 1 3/4" (44) 1 3/4" (44) SPECIFICATIONS WINE STORAGE CAPACITY 315W 424G 424FSG SHIPPING WEIGHT UNDERCOUNTER 315W 424G 424FSG 56 | Sub-Zero Customer Care 800.222.
WINE STORAGE BUILT-IN Overall Dimensions Opening Dimensions MODEL 424FSG MODEL 315W AND 424G 24 1/4" (616) 24 5/8" (625) 24" (610) OPENING DEPTH PRO 48 34 3/16" (868) TOP VIEW 4" (102) 34 1/2" W (876) OPENING HEIGHT OPENING WIDTH INTEGRATED SIDE VIEW FRONT VIEW 25 3/8" (645) OPENING WIDTH 1 3/4" (44) MODEL 315W 424G Freestanding model 424FSG has a finished stainless steel exterior and handles.
BUILT-IN WINE STORAGE Overall Dimensions COLUMN TALL W 24" (610) W PRO 48 4 1/2" (114) 24" (610) 4 1/2" (114) 84"* 69 1/2" 84"* 44 7/8" (2134) (1765) (2134) (1140) 3/8" (10) 13 5/16" (338) 3/8" (10) INTEGRATED 10 9/16" (268) 3 5/8" (92) 3 5/8" (92) *83 1/2" (2121) MIN TO 84 1/2" (2146) MAX *83 1/2" (2121) MIN TO 84 1/2" (2146) MAX A A 13/4" (45) WINE 13/4" (45) 17 3/4" B COLUMN UNDERCOUNTER MODEL IW-18 IW-24 IW-30 B (451) TALL W A B MODEL W A B 18" (457) 24" (610
WINE STORAGE BUILT-IN Specifications INTERIOR CAPACITY COLUMN BOTTLES (750 ML) IW-18 IW-24 IW-30 TALL IW-30R 59 102 146 R CU FT (L) BOTTLES (750 ML) 4.0 (113) 86 PRO 48 SHIPPING WEIGHT COLUMN IW-18 IW-24 IW-30 TALL IW-30R LB (KG) 350 (159) 410 (186) 460 (209) LB (KG) 490 (222) INTEGRATED WINE UNDERCOUNTER subzero.
BUILT-IN WINE STORAGE Opening Dimensions INTEGRATED WINE STORAGE OPENING DIMENSIONS COLUMN AND TALL 18" Column 24" Column 30" Column and Tall PRO 48 25" (635) OPENING DEPTH TOP VIEW W H 18" (457) 24" (610) 30" (762) 84" (2134) 84" (2134) 84" (2134) The depth of each integrated (IW) model is 24" (610). Allow for panel thickness when planning the finished opening depth. A minimum 3 1/2" (89) finished return is required on all sides of the opening.
WINE STORAGE BUILT-IN Overall Dimensions Opening Dimensions MODEL WS-30 MODEL WS-30 STANDARD INSTALLATION 26 3/16" (665) 30" (762) 24" (610) OPENING DEPTH PRO 48 84" TOP VIEW (2134) 73 3/4" (1873) 4" (102) 23 7/8" (606) W (2127) OPENING HEIGHT OPENING WIDTH INTEGRATED HEIGHT DIMENSIONS ± 1/2" (13) 83 3/4" 23 7/8" (606) 17" (432) 311/4" (796) SIDE VIEW FRONT VIEW WINE NOTE: Shaded line represents profile of unit.
BUILT-IN WINE STORAGE Opening Dimensions MODEL WS-30 FLUSH INSET INSTALLATION 26 3/16" 2 3/16" (56) FINISHED CLEATS* PRO 48 (665) FLUSH INSET DEPTH TOP VIEW 11/4" INTEGRATED 1/4" (6) (32) 84" W (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL WINE SIDE VIEW 2 3/16" (56) FRONT VIEW *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 3/4" (19) panel.
WINE STORAGE BUILT-IN Opening Dimensions MODEL WS-30 DUAL STANDARD INSTALLATION 24" (610) OPENING DEPTH PRO 48 TOP VIEW W (2127) OPENING HEIGHT OPENING WIDTH SIDE VIEW INTEGRATED 83 3/4" FRONT VIEW WINE NOTE: Shaded line represents profile of unit. A dual installation kit will be required for this installation. DUAL OPENING WIDTH MODELS WS-30 and 30" Built-In WS-30 and 36" Built-In W 59 3/4" (1518) 65 3/4" (1670) UNDERCOUNTER subzero.
BUILT-IN WINE STORAGE Opening Dimensions MODEL WS-30 DUAL FLUSH INSET INSTALLATION 26 3/16" 2 3/16" (56) FINISHED CLEATS* PRO 48 (665) FLUSH INSET DEPTH TOP VIEW 11/4" INTEGRATED 1/4" (6) (32) 84" W (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL WINE SIDE VIEW 2 3/16" (56) FRONT VIEW *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry. NOTE: Shaded line represents profile of unit with 3/4" (19) panel.
WINE STORAGE BUILT-IN Electrical If the unit will be connected to a home security system, allow 36" (914) of excess wiring for proper connection. IMPORTANT NOTE: For integrated (IW) models, the electrical outlet must be positioned with the grounding prong to the right of the thinner blades.
PRO 48 BUILT-IN WINE STORAGE Custom Panels Custom Panel—315W and 424G For framed, overlay, integrated and flush inset applications, a custom door panel must be provided. Handle hardware must also be provided for overlay, integrated and flush inset applications. Refer to panel requirements and custom panel dimensions charts for your specific model and design application.
WINE STORAGE BUILT-IN Custom Panel—Integrated For integrated (IW) models, a custom door panel and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. TYPICAL PANEL DIMENSIONS Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer. 79 7/8" 49 3/8" (2029) (1254) PRO 48 The thickness of the custom panel can vary.
BUILT-IN WINE STORAGE Custom Panel—Integrated TOE KICK CLEARANCE The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. Toe kick heights from 2" (51) to 3 7/8" (98) require a reduced toe kick accessory available through an authorized Sub-Zero dealer.
WINE STORAGE BUILT-IN Custom Panel—WS-30 FRAMED PANEL FRAMED PANEL DIMENSIONS The framed application is an overlay model with framed design features. It is not a separate model. H A 1/4" Routing, recessing and optional extended handles may be required for finger clearance. Refer to the full-scale template on page 78. A A H PRO 48 (6), a filler material If the custom panel is thinner than must be added to achieve a proper fit.
BUILT-IN WINE STORAGE Custom Panel—WS-30 OVERLAY PANELS OVERLAY PANEL DIMENSIONS Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations below.
WINE STORAGE BUILT-IN Custom Panel—WS-30 FLUSH INSET PANELS FLUSH INSET PANEL DIMENSIONS The flush inset application is an overlay model with flush inset panels. It is not a separate model. A A A H PRO 48 The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel.
BUILT-IN WINE STORAGE Custom Panel—WS-30 FLUSH INSET PANEL OFFSET TOP VIEW The illustrations provide panel offsets and reveals for model WS-30 in a flush inset application. Refer to the chart below for reference to the illustrations.
WINE STORAGE BUILT-IN Custom Panel—WS-30 DUAL FLUSH INSET PANEL DIMENSIONS DUAL INSTALLATIONS Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero customer care at 800-222-7820. For dual standard installations, panel dimensions are the same as for single installations. Refer to the chart on page 70.
BUILT-IN WINE STORAGE Custom Panel—WS-30 DUAL FLUSH INSET PANEL OFFSET TOP VIEW The illustrations provide panel offsets and reveals for model WS-30 in a dual flush inset application. Refer to the chart below for reference to the illustrations.
WINE STORAGE BUILT-IN Custom Panel—WS-30 Standard Handles SIDE PANEL Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. The custom side panel must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below.
BUILT-IN WINE STORAGE Wine Rack Wood Facing WOOD FACING WIDTH The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for profile dimensions of the wood facing and the chart for width.
WINE STORAGE BUILT-IN Door Clearance—315W and 424G FULL-SCALE TEMPLATE To allow for a 145° door opening, the unit should extend a minimum of 1/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
BUILT-IN WINE STORAGE Framed Panel—WS-30 PRO 48 FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE INTEGRATED STANDARD FULL-LENGTH HANDLE 1" 2" 3" (25) (51) (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL WINE 1/4" (6) FRAMED PANEL DOOR UNDERCOUNTER Framed panel thickness. 78 | Sub-Zero Customer Care 800.222.
WINE STORAGE BUILT-IN Overlay and Flush Inset Panels—WS-30 FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. PRO 48 DEPTH OF TUBULAR AND PRO HANDLES 2" 3" (51) (76) INTEGRATED 1" (25) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .
BUILT-IN WINE STORAGE Overlay Application—WS-30 FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT PRO 48 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) INTEGRATED 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) WINE 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER UNDERCOUNTER PANEL 0" 1" (25) SCALE 90° door opening (top view). 80 | Sub-Zero Customer Care 800.222.
WINE STORAGE BUILT-IN Flush Inset Application—WS-30 FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) PRO 48 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS INTEGRATED WINE 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) UNDERCOUNTER SCALE 110° door opening (top view). subzero.
BUILT-IN WINE STORAGE PRO 48 FILLER STRIP 11/4" (32) DOOR CLOSED WINE INTEGRATED APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation—WS-30 FULL-SCALE TEMPLATE Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. UNDERCOUNTER 0" 1" (25) SCALE Dual standard installation (top view). 82 | Sub-Zero Customer Care 800.222.
WINE STORAGE BUILT-IN FILLER STRIP PRO 48 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE DOOR CLOSED INTEGRATED WINE Dual Flush Inset Installation—WS-30 DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) UNDERCOUNTER SCALE Dual flush inset installation (top view). subzero.
UNDERCOUNTER REFRIGERATION BUILT-IN Undercounter Refrigeration KEY FEATURES • Overlay and stainless steel design applications. • Handle options coordinate with handles of Wolf cooking products. • Models UC-24RO and UC-15I(P)O are UL approved for outdoor use. • Energy efficient; many models are ENERGY STAR® qualified. • Star-K certified (except ice machine models). PRO 48 Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, home office or media room.
BUILT-IN UNDERCOUNTER REFRIGERATION Overall Dimensions UNDERCOUNTER ICE MACHINE PRO 48 23 7/8" (606) 14 3/4" (375) 24" (610) 23" (584) 34" 33 5/8" (864) (854) 4" (102) INTEGRATED 4" (102) 18" (457) 25 3/8" (645) 6" (152) 26" (660) 8" (203) WINE SPECIFICATIONS SPECIFICATIONS INTERIOR CAPACITY R CU FT (L) UC-24R, UC-24RO UC-24BG UC-24C(I) 5.7 (161) 6.0 (170) 3.6 (102) SHIPPING WEIGHT 24" Model UNDERCOUNTER Refer to page 91 for door clearance information.
UNDERCOUNTER REFRIGERATION BUILT-IN Opening Dimensions DUAL INSTALLATION UNDERCOUNTER 24" (610) OPENING DEPTH TOP VIEW Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For questions regarding the installation, call Sub-Zero customer care at 800-222-7820.
BUILT-IN UNDERCOUNTER REFRIGERATION Electrical PRO 48 The electrical supply should be located within the shaded area shown in the illustration. For ice machine models, it is recommended that electrical supply be placed in an adjacent cabinet. A separate circuit, servicing only this appliance is required. IMPORTANT NOTE: For outdoor models UC-24RO and UC-15I(P)O, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock.
UNDERCOUNTER REFRIGERATION BUILT-IN Plumbing IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure as indicated in the chart below at all times. A copper line is not recommended for this application. ICE MACHINE DRAIN Ice machine models can be ordered with or without a drain pump. Models without a pump will drain water by gravity. A drain must be installed. The drain and inlet water tubes must be plumbed before connecting to the ice machine.
BUILT-IN UNDERCOUNTER REFRIGERATION Custom Panel For overlay undercounter models, custom door panels and handle hardware must be provided. Refer to the charts for panel requirements and dimensions. PRO 48 Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
UNDERCOUNTER REFRIGERATION BUILT-IN Custom Panel Standard Handles OVERLAY PANEL DIMENSIONS Optional stainless steel tubular and pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. A H A A H Refer to the chart below for standard handle lengths for undercounter models.
BUILT-IN UNDERCOUNTER REFRIGERATION Wine Rack Wood Facing FULL-SCALE TEMPLATE WOOD FACING WIDTH The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for profile dimensions of the wood facing and the chart for widths.
UNDERCOUNTER REFRIGERATION BUILT-IN Door Clearance—Undercounter FULL-SCALE TEMPLATE To allow for a 145° door opening, the unit should extend a minimum of 1/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc.
Sub-Zero Outdoor Limited Warranty* FOR RESIDENTIAL USE FULL ONE YEAR WARRANTY** For one year from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.
