Design Guide

ManualsBrandsSub-Zero ManualsBuilt-In Side-by-Side RefrigeratorsSub-Zero 42" Built-In Side-By-Side Refrigerator With Internal Dispenser

SUB-ZERO DESIGN GUIDE

REVISED 7/ 2016

Summary of content (100 pages)

PAGE 1
SUB-ZERO DESIGN GUIDE REVISED 7 / 2016
PAGE 2
TA B L E O F C O N T E N T S 3 B U I L T- I N R E F R I G E R A T I O N 40 P R O 4 8 R E F R I G E R AT I O N 46 I N T E G R AT E D R E F R I G E R AT I O N 56 WINE STORAGE 88 U N D E R C O U N T E R R E F R I G E R AT I O N 98 SUB-ZERO WARRANTIES Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. Throughout this guide, dimensions may vary by ± 1/8" (3).
PAGE 3
PAGE 4
B U I L T- I N B UILT-IN R EF R IGE RATION Built-In Refrigeration B UILT-IN MO DELS I N T E G R AT E D PRO 48 For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the builtin line nothing short of revolutionary. BI-36R BI-42UFD(ID) BI-36F BI-36S UNDERCOUNTER WINE BI-36UFD(ID) BI-36RG 4 | Sub-Zero Customer Care 800.
PAGE 5
B UILT-IN R EF R IGE RATION B U I L T- I N Specifications INTERIOR CAPACITY— CU FT (L ) A L L R E F R I G E R AT O R | ALL FREE Z E R BI-36R BI-36RG BI-36F OV E R - A N D - U N D E R SI D E - B Y- S I D E 22.7 (643) REFR FRZR 13.2 (374) 13.1 (371) 16.4 (464) 16.3 (462) 15.7 (445) 18.3 (518) 4.2 (119) 4.2 (119) 5.3 (150) 5.3 (150) 5.3 (150) 6.4 (181) REFR FRZR 12.4 (351) 16.3 (462) 15.8 (447) 16.0 (453) 19.1 (541) 18.6 (527) 18.8 (532) 8.2 (232) 8.0 (227) 7.9 (224) 7.9 (224) 9.8 (278) 9.
PAGE 6
B U I L T- I N B UILT-IN R EF R IGE RATION PRO 48 Built-In Design Options F R AMED O VER LAY For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed application is an overlay model with framed design features. Panel, grille and handle options are available. Custom overlay door panels can be combined with unique handle hardware for design flexibility.
PAGE 7
B UILT-IN R EF R IGE RATION B U I L T- I N Built-In Design Options F LUS H INS ET S TA I N LES S S TEEL The flush inset design option allows for flush door and grille panels and custom handle hardware. Shown with tubular handle option to match Wolf built-in ovens. The flush inset application is an overlay model with flush inset panels. Customize with panel, grille and handle options. For a professional look, classic stainless steel models require no customization.
PAGE 8
B U I L T- I N B UILT-IN R EF R IGE RATION Overall Dimensions A L L R EF R IG ER ATOR | AL L FRE E Z E R 26 3/16" (665) PRO 48 36" (914) 84" (2134) 73 3/4" I N T E G R AT E D (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 14 1/8" (359) 37 1/4" WINE (946) 2 3/8" (60) UNDERCOUNTER Model BI-36R, BI-36RG, BI-36F. 8 | Sub-Zero Customer Care 800.222.7820 23 7/8" (606) Overall dimensions are based on stainless steel models.
PAGE 9
B UILT-IN R EF R IGE RATION B U I L T- I N Overall Dimensions O VER -AND-UND E R 26 3/16" (665) 30" (762) 26 3/16" (665) 36" (914) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) (606) (606) 14 1/8" 12 1/8" (308) (600) 23 7/8" (606) 23 7/8" 23 7/8" 23 5/8" 4" (102) I N T E G R AT E D (584) (584) HEIGHT DIMENSIONS ± 1/2" (13) PRO 48 84" 84" (2134) (359) 311/4" (796) 23 5/8" (600) 37 1/4" (946) WINE 2 3/8" (60) 2 3/8" (60
PAGE 10
B U I L T- I N B UILT-IN R EF R IGE RATION Overall Dimensions O VER -AND-UND E R 26 3/16" (665) PRO 48 36" (914) 26 3/16" (665) 42" (1067) 84" 84" (2134) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" I N T E G R AT E D (584) HEIGHT DIMENSIONS ± 1/2" (13) (584) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" 4" (102) 23 7/8" (606) (606) 8" 9" (203) (229) 23 5/8" 191/2" 23 5/8" (495) (600) (600) 221/4" WINE (565) 2 3/8" (60) UNDERCOUNTER Model BI-36UFD(ID).
PAGE 11
B UILT-IN R EF R IGE RATION B U I L T- I N Overall Dimensions S I DE-B Y-S IDE 26 3/16" (665) 36" (914) (2134) 73 3/4" 73 3/4" (1873) (1873) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" (606) 23 7/8" (606) (606) 7 1/2" (191) 8 3/4" (222) I N T E G R AT E D 4" (102) 23 7/8" 7 1/4" (184) PRO 48 84" 84" (2134) HEIGHT DIMENSIONS ± 1/2" (13) 26 3/16" (665) 42" (1067) 10 3/8" (264) 26 1/4" 221/4" (668) (565) WINE 2 3/8" (60) 2 3/8" (60) Model BI-36S.
PAGE 12
B U I L T- I N B UILT-IN R EF R IGE RATION Overall Dimensions S I DE-B Y-S IDE 26 3/16" (665) PRO 48 48" (1219) 84" (2134) 73 3/4" I N T E G R AT E D (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 8 3/8" (213) 11 5/8" (295) 30" WINE (762) 2 3/8" (60) UNDERCOUNTER Model BI-48S(ID), BI-48SD. 12 | Sub-Zero Customer Care 800.222.
PAGE 13
B UILT-IN R EF R IGE RATION B U I L T- I N Specifications SHIPPING WEIGHT A L L R E F R I G E R AT O R | ALL FREE Z E R BI-36R BI-36RG BI-36F OV E R - A N D - U N D E R SI D E - B Y- S I D E L B (KG ) 538 (244) 582 (264) 608 (276) 608 (276) 630 (286) 656 (298) 656 (298) I N T E G R AT E D BI-36S BI-42S BI-42SID BI-42SD BI-48S BI-48SID BI-48SD L B (KG ) 462 (210) 476 (216) 515 (234) 529 (240) 529 (240) 582 (264) PRO 48 BI-30U BI-30UG BI-36U(ID) BI-36UG BI-36UFD(ID) BI-42UFD(ID) L B (KG ) 420 (1
PAGE 14
B U I L T- I N B UILT-IN R EF R IGE RATION Opening Dimensions S TANDAR D INS TAL L ATION PRO 48 24" (610) OPENING DEPTH I N T E G R AT E D TOP VIEW 83 3/4" (2127) OPENING HEIGHT WINE SIDE VIEW W OPENING WIDTH FRONT VIEW NOTE: Shaded line represents profile of unit. UNDERCOUNTER OPENING WIDTH W 30" Model 29 1/2" (749) 36" Model 35 1/2" (902) 42" Model 41 1/2" (1054) 48" Model 47 1/2" 14 | Sub-Zero Customer Care 800.222.
PAGE 15
B UILT-IN R EF R IGE RATION B U I L T- I N Opening Dimensions F LUS H INS ET INSTAL L ATION 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) PRO 48 FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) I N T E G R AT E D 84" (2134) FLUSH INSET HEIGHT W FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW WINE *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
PAGE 16
B U I L T- I N B UILT-IN R EF R IGE RATION Opening Dimensions D U AL S TANDARD INSTAL L ATION PRO 48 24" (610) OPENING DEPTH I N T E G R AT E D TOP VIEW (2127) OPENING HEIGHT WINE SIDE VIEW OPENING WIDTH FRONT VIEW NOTE: Shaded line represents profile of unit. DUAL OPENING WIDTH UNDERCOUNTER W 83 3/4" W Two 30" Models 59 3/4" (1518) 30" and 36" Models 65 3/4" (1670) Two 36" Models 71 3/4" (1822) 16 | Sub-Zero Customer Care 800.222.
PAGE 17
B UILT-IN R EF R IGE RATION B U I L T- I N Opening Dimensions D U AL F LUS H IN SE T INSTAL L ATION 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) PRO 48 FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) I N T E G R AT E D W 84" (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW WINE *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
PAGE 18
B U I L T- I N B UILT-IN R EF R IGE RATION Electrical Plumbing The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below.
PAGE 19
B UILT-IN R EF R IGE RATION B U I L T- I N Custom Panels For framed, overlay and flush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay and flush inset applications. Refer to panel requirements below and the charts on pages 22–27 for custom panel dimensions for your specific design application. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
PAGE 20
B U I L T- I N B UILT-IN R EF R IGE RATION PRO 48 Custom Panels PART IAL F R AME D OPTION PAN EL M O U N TI N G K I T The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
PAGE 21
B UILT-IN R EF R IGE RATION B U I L T- I N Custom Panels F LUS H INS ET PA NE L S I C E A N D WATER D I S P EN S ER The flush inset application is an overlay model with flush inset panels. It is not a separate model. For models BI-42SD and BI‑48SD, the refrigerator door panel must include a cut-out to accommodate the external dispenser. The thickness of the panel in this area can range from 1/4" (6) to a maximum of 1 1/8" (29). Refer to the illustrations below.
PAGE 22
B U I L T- I N B UILT-IN R EF R IGE RATION Framed Panel Dimensions H H H H H H H A A H H AH A A A A H H H H H H AH AH H A AH A H H H H AH A H H W W W W W I N T E G R AT E D BI-30U, BI-36U(ID) H H H H H W H 35 3/4" (908) 69 9/16" (1767) W H H H H H H 8 15/16" (227) GRI L L E ( O P T I O N A L) H H H H H 35 3/4" (908) BI-36RG A 5 3/16A" A(132) A Stiles | Rails B B B A A 10 5/16" (262) W (1268) W H 29 3/4" (756) 18 11/16" (475) GRI L L E ( O P T I O N A L) Grille Panel
PAGE 23
B UILT-IN R EF R IGE RATION WW AA HH HH B U I L T- I N HH WW BB WW WW WW WW WW Framed Panel Dimensions HH HH HH HH PRO 48 AA BB WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW WW BI-42SD, BI-48SD MODEL BI-48S, BI-48SID, BI-48SD R E F R I G E R AT O R Door Panel W H 19 13/16" (503) 69 9/16" (1767) FREEZER Door Panel W H 15 7/16" (392) 69 9/16" (1767) GRI L L E ( O P T I O N A L) Grille Panel W H 35 3/4" (908) 8 15/16" (227) REFRIGERATOR Door Panel FREEZER Door Panel GRIL
PAGE 24
B U I L T- I N B UILT-IN R EF R IGE RATION Overlay Panel Dimensions H H H H H H H H H AH A H H H H H A A A H AH AH H A AH A H H H H AH A H H W W W W W I N T E G R AT E D BI-30U, BI-36U(ID) H H H H H H H H W H 36" (914) 35 1/8" (892) 35 3/4" (908) 69 3/4" (1772) 15/16" (1751) 68 H H H H H 69 9/16" (1767) GRI L L E Overlay Panel Spacer Panel Backer Panel W H 36" (914) A A A 35 1/8" (892) B B 35 3/4" (908) 9 1/4" (235)* 8 5/16" (211) B 8 15/16" (227) BI-36RG Stiles | Rails W W W
PAGE 25
B UILT-IN R EF R IGE RATION WW AA HH HH B U I L T- I N HH WW BB WW WW WW WW WW Overlay Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR HH Overlay Panel Spacer Panel Backer Panel HH W H 25 1/16" (637) 24 3/16" (614) 24 13/16" (630) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) FREEZER AA BB WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW W H 16 11/16" (424) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRIL L E Overlay Panel Sp
PAGE 26
B U I L T- I N B UILT-IN R EF R IGE RATION Flush Inset Panel Dimensions H H H H H H H H H AH A H H H H H A A A H AH AH H A AH A H H H H AH A H H W W W W W I N T E G R AT E D BI-30U, BI-36U(ID) H H H H H H H H WINE BI-30UG, BI-36UG W W W W W BI-36UFD(ID), BI-42UFD(ID) W H 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 37" (940) A A A 35 1/8" (892) B B 35 3/4" (908) 9 1/4" (235) 8 5/16" (211) B 8 15/16" (227) A A B B R EF R I G E R AT O R W H Flush Inset Panel Spacer Pan
PAGE 27
B UILT-IN R EF R IGE RATION WW AA HH HH B U I L T- I N HH WW BB WW WW WW WW WW Flush Inset Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH HH HH REFRIGERATOR W H Flush Inset Panel Spacer Panel Backer Panel 25 9/16" (649) 24 3/16" (614) 24 13/16" (630) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) FREEZER AA BB WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW W H 17 3/16" (437) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRIL L E Flush Ins
PAGE 28
B UILT-IN R EF R IGE RATION TOP VIEW TOP VIEW B U I L T- I N BACKER CABINETRY SPACER BACKER SPACER PANEL O F F S ET 5/16" (8) BACKER SPACER PRO 48 IL L U S Door (hinge) | Drawer | Grille Sides Doors (handle) Sides (French door only) Grille Top Grille Bottom | Door Top Door Bottom | Drawer Top Drawer Bottom SI D E - B Y- S I D E Doors (hinge) | Grille Sides Doors (handle) Sides Grille Top Grille Bottom | Door Top Door Bottom 5/16A " (8) A B GRILLE C CABINETRY D E F IL L U S GRILLE A B C D F C
PAGE 29
B UILT-IN R EF R IGE RATION B U I L T- I N Dual Installation For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 22–25. Panel dimensions and offsets for dual flush inset installations are listed on the following pages. PRO 48 If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit.
PAGE 30
B U I L T- I N B UILT-IN R EF R IGE RATION Dual Flush Inset Panel Dimensions H H H H H H H H H H H H A AH AH A A AH H H H W W W W BI-36R, BI-36F B B H H W W W W BI-36RG I N T E G R AT E D W W W W W W W H 36 1/2" (927) 35 1/8" (892) 35 3/4" (908) 50 1/8" (1273) 49 5/16" (1253) 49 15/16" (1268) W H 36 1/A2" A(927) 35 1/8" (892) B B 35 3/4" (908) 9 1/4"A(235) A 8 5/16" (211) B 8 15/16" (227) W W WW A B 5 3/4" (146) 10 3/8" (264) W W W W 30 1/2" (775) 29 1/8" (740) 29 3/4" (
PAGE 31
B UILT-IN R EF R IGE RATION TOP VIEW TOP VIEW CABINETRY TOP VIEW Dual Installation D U AL F LUS H IN SE T PANE L OFFSE T BACKER 5/8"CABINETRY (16) SPACER IL L U S Door (hinge) | Grille Sides Door (handle) Sides Grille Top Grille Bottom | Door Top Door Bottom A B C CABINETRY D F OV E R - A N D - U N D E R IL L U S TOP VIEW GRILLE 5/CABINETRY 8" (16) 5/16" (8) 1/2" (13) BACKER 1/2" (13) CABINETRY 5/8" (16) 5/16" (8) CABINETRY 1/2" (13) 5/8" (16) 1/2" (13) 5/16" (8) 5/16" (8) DOOR 1
PAGE 32
B U I L T- I N B UILT-IN R EF R IGE RATION Dual Installation D U AL WIDE G R IL L E DUAL WIDE GRILLE—FLUSH INSET PRO 48 A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 84" (2134) finished height.
PAGE 33
B UILT-IN R EF R IGE RATION B U I L T- I N Standard Handles The custom side panels must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
PAGE 34
B U I L T- I N B UILT-IN R EF R IGE RATION Framed Panels PRO 48 F ULL-S CALE T E MPL ATE OPTIONAL EXTENDED FULL-LENGTH HANDLE I N T E G R AT E D STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL WINE 1/4" (6) FRAMED PANEL DOOR UNDERCOUNTER Framed panel thickness. 34 | Sub-Zero Customer Care 800.222.
PAGE 35
B UILT-IN R EF R IGE RATION B U I L T- I N Overlay | Flush Inset Panels F ULL-S CALE T E MPL ATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. PRO 48 DEPTH OF TUBULAR AND PRO HANDLES 2" (51) 3" I N T E G R AT E D 1" (25) (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .
PAGE 36
B U I L T- I N B UILT-IN R EF R IGE RATION Overlay Application F ULL-S CALE T E MPL ATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT PRO 48 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) I N T E G R AT E D 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) WINE 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) UNDERCOUNTER 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view). 36 | Sub-Zero Customer Care 800.
PAGE 37
B UILT-IN R EF R IGE RATION B U I L T- I N Flush Inset Application F ULL-S CALE T E MPL ATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) PRO 48 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS I N T E G R AT E D WINE 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER 0" 1" (25) SCALE 110° door opening (top view). subzero.
PAGE 38
B U I L T- I N B UILT-IN R EF R IGE RATION PRO 48 FILLER STRIP 11/4" (32) WINE I N T E G R AT E D APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation F ULL-S CALE T E MPL ATE UNDERCOUNTER Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view). 38 | Sub-Zero Customer Care 800.222.
PAGE 39
B UILT-IN R EF R IGE RATION B U I L T- I N FILLER STRIP PRO 48 1 1/2" (38) 1/2" (13) WINE Dual Flush Inset Installation DOOR CLOSED I N T E G R AT E D PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE DOOR OPEN 110° F ULL-S CALE T E MPL ATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 1" (25) SCALE Dual flush inset installation (top view). subzero.
PAGE 40
PAGE 41
P RO 48 R EF R IGE RATION B U I L T- I N PRO 48 Refrigeration P R O 4 8 MO D ELS PRO 48 Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monument to food preservation— equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or freestanding.
PAGE 42
B U I L T- I N P RO 48 R EF R IGE RATION Overall Dimensions P RO 48 25 7/8" (657) PRO 48 48" (1219) 84" (2134) 42 1/8" (1070) 30 1/2" I N T E G R AT E D (775) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 30 3/16" (767) 23 7/8" (606) 14 1/2" (368) 21" (533) 30 3/4" WINE (781) 2 3/8" (60) Model 648PRO, 648PROG. SPECIFICATIONS IN TERIOR C APAC ITY 648PRO 648PROG UNDERCOUNTER SH IPP IN G WEIGH T 648PRO 648PROG 42 | Sub-Zero Customer Care 800.222.7820 R C U FT (L) F CU FT (L) 18.
PAGE 43
P RO 48 R EF R IGE RATION B U I L T- I N Opening Dimensions S TANDAR D | F LU SH INSTAL L ATION D OPENING DEPTH PRO 48 TOP VIEW I N T E G R AT E D W H OPENING WIDTH OPENING HEIGHT SIDE VIEW FRONT VIEW WINE OPENING DIMENSIONS Standard Flush W H D 47 1/2" (1206) 48" (1219) 83 3/4" (2127) 84 1/8" (2137) 24" (610) 26" (660) For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry.
PAGE 44
B U I L T- I N P RO 48 R EF R IGE RATION Electrical Plumbing The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below.
PAGE 45
P RO 48 R EF R IGE RATION B U I L T- I N Standard Handles Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for PRO 48 models.
PAGE 46
PAGE 47
I N T EG R AT ED R E FRIGE RATION B U I L T- I N Integrated Refrigeration With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen.
PAGE 48
B U I L T- I N I N T EG R AT ED R E FRIGE RATION Specifications INTERIOR CAPACITY— CU FT PRO 48 CO L U M N IC-18FI IC-24R IC-24FI IC-30R(ID) IC-30FI IC-36R(ID) IC-36FI TA L L C O LU MN (L ) RE FR FRZR 8.4 (238) 17.3 (490) 15.3 (433) 21.4 (606) 20.0 (566) FRZR 16.5 (467) 10.6 (300) 20.5 (580) 13.3 (377) DRAWE R RE FR ID-24R ID-24F(I) ID-27R ID-30R(P) ID-30F(I) ID-30C(I) ID-36R(P) ID-36C(I) 4.0 (113) 69 1/2" 84"* (2134) (1765) 15.1 (428) 5.0 (142) 6.4 (181) FRZR 3.8 (108) 4.6 (130) 5.
PAGE 49
I N T EG R AT ED R E FRIGE RATION B U I L T- I N Overall Dimensions TALL D R AW ER W W 24" (610) 24" (610) 1/4" (6) 4 1/2" (114) 13 5/16" (338) (876) 3/8" (10) 10 9/16" (268) 44 7/8" 84"* (2134) PRO 48 34 1/2"* (1140) 3 5/8" (92) *34" (864) MIN TO 35" (889) MAX 3/8" (10) 13 5/16" (338) I N T E G R AT E D 3/8" (10) 10 9/16" (268) 18 3/8" (467) 3 5/8" (92) *83 1/2" (2121) MIN TO 84 1/2" (2146) MAX DRAWER A 13/4" (45) (467) TA LL 24" Drawer 24" (610) 27" Drawer 27" (686) 30" Dr
PAGE 50
B U I L T- I N I N T EG R AT ED R E FRIGE RATION Opening Dimensions I N T EG R AT ED OPENING DIMENSIONS PRO 48 25" (635) OPENING DEPTH H 18" (457) 24" (610) 30" (762) 36" (914) 84" (2134) 84" (2134) 84" (2134) 84" (2134) 24" Drawer 27" Drawer 30" Drawer 36" Drawer W H 24" (610) 27" (686) 30" (762) 36" (914) 34 1/2" (876) 34 1/2" (876) 34 1/2" (876) 34 1/2" (876) The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth.
PAGE 51
I N T EG R AT ED R E FRIGE RATION B U I L T- I N Electrical Plumbing The electrical supply must be located within the shaded area shown in the illustration and chart below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The water supply line should be located within the shaded area shown in the illustration below.
PAGE 52
B U I L T- I N I N T EG R AT ED R E FRIGE RATION Custom Panels PRO 48 For integrated models, custom door panels and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. TY PI C AL PAN EL D I M EN S I O N S The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each integrated model is 24" (610).
PAGE 53
I N T EG R AT ED R E FRIGE RATION B U I L T- I N Custom Panels TO E K I C K C LEAR A N C E The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
PAGE 54
B U I L T- I N I N T EG R AT ED R E FRIGE RATION Standard Handles Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
PAGE 55
I N T EG R AT ED R E FRIGE RATION B U I L T- I N Maximum Door Opening F ULL-S CALE T E MPL ATE As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by utilizing the 90° door stop. PRO 48 3/4" (19) PANEL DOOR OPEN MAXIMUM 105° POTENTIAL INTERFERENCE I N T E G R AT E D 1/8" (3) REVEAL DOOR CLOSED 3/4" (19) PANEL ADJACENT CABINETRY WINE POTENTIAL INTERFERENCE 1" (25) SCALE Maximum door opening (top view). subzero.
PAGE 56
PAGE 57
W INE S T O R AG E B U I L T- I N Wine Storage Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home. PRO 48 W INE S T O R AG E MODE L S 424G 424FSG UW-24FS IW-24 IW-30 IW-30R I N T E G R AT E D UW-24 IW-18 WS-30 BW-30 WINE | 57 UNDERCOUNTER subzero.
PAGE 58
B U I L T- I N W INE S T O R AG E Overall Dimensions M ODEL 424G | UW-24 23 7/8" (606) MO D EL 4 2 4 FS G | U W-2 4 FS 24 1/4" (616) 24" (610) 34 3/16" PRO 48 34" (864) (868) I N T E G R AT E D 4" (102) 4" (102) 25 3/8" 25 3/8" (645) (645) 1 3/4" (44) 1 3/4" (44) SPECIFICATIONS ST O R A G E C A PA C I TY WINE 424G, UW-24 424FSG, UW-24FS UNDERCOUNTER BOTTL ES* 46 46 SH I P P I N G W E I G H T L B (KG ) 424G, UW-24 424FSG, UW-24FS 195 (88) 220 (100) *750 ml bottles.
PAGE 59
W INE S T O R AG E B U I L T- I N Opening Dimensions M ODEL 424G | UW-24 24" (610) OPENING DEPTH PRO 48 TOP VIEW 34 1/2" W (876) OPENING HEIGHT OPENING WIDTH OPENING WIDTH 424G, UW-24 DUAL OPENING WIDTH Two 24" Models I N T E G R AT E D SIDE VIEW FRONT VIEW W 24" (610) W 48 1/8" (1222) Dual installation kit required. WINE | 59 UNDERCOUNTER subzero.
PAGE 60
B U I L T- I N W INE S T O R AG E Overall Dimensions C OLUMN TALL W W 24" (610) PRO 48 4 1/2" (114) 4 1/2" (114) 69 1/2" 84"* (2134) 24" (610) 44 7/8" 84"* (1765) (2134) (1140) 3/8" (10) 13 5/16" (338) I N T E G R AT E D 3/8" (10) 10 9/16" (268) 3 5/8" (92) *83 1/2" (2121) MIN TO 84 1/2" (2146) MAX A A WINE 13/4" (45) UNDERCOUNTER 13/4" (45) 17 3/4" B COLUMN 3 5/8" (92) *83 1/2" (2121) MIN TO 84 1/2" (2146) MAX (451) W A B IW-18 18" (457) 2 1/2" (64) 16 1/2" (419)
PAGE 61
W INE S T O R AG E B U I L T- I N Specifications STORAGE CAPACITY CO L U M N BOTTL ES* IW-18 IW-24 IW-30 TA L L RE FR BOTTL ES* 4.0 cu ft (113 L) 86 PRO 48 IW-30R 59 102 146 *750 ml bottles. SHIPPING WEIGHT CO L U M N IW-18 IW-24 IW-30 TA L L IW-30R L B (KG ) 350 (159) 410 (186) 460 (209) L B (KG ) 490 (222) I N T E G R AT E D WINE | 61 UNDERCOUNTER subzero.
PAGE 62
B U I L T- I N W INE S T O R AG E Opening Dimensions I N T EG R AT ED WINE STORAGE OPENING DIMENSIONS PRO 48 25" (635) OPENING DEPTH TOP VIEW W H 18" Column 18" (457) 84" (2134) 24" Column 24" (610) 84" (2134) 30" Column | Tall 30" (762) 84" (2134) The depth of each integrated (IW) model is 24" (610). Allow for panel thickness when planning the finished opening depth. A minimum 3 1/2" (89) finished return is required on all sides of the opening.
PAGE 63
W INE S T O R AG E B U I L T- I N Overall Dimensions M ODEL WS -30 | BW-30 SPECIFICATIONS 26 3/16" (665) 30" (762) STORAGE C A PAC ITY B OT T LE S * WS-30 BW-30 SH IPP IN G WEIGH T LB ( K G ) 445 (202) 445 (202) *750 ml bottles. 84" (2134) PRO 48 WS-30 BW-30 147 146 73 3/4" (1873) 4" (102) I N T E G R AT E D HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" (606) 17" (432) 311/4" (796) WINE 2 3/8" (60) Overall dimensions are based on the stainless steel model.
PAGE 64
B U I L T- I N W INE S T O R AG E Opening Dimensions M ODEL WS -30 | BW-30 STANDARD INSTAL LATI O N PRO 48 24" (610) OPENING DEPTH I N T E G R AT E D TOP VIEW 83 3/4" (2127) OPENING HEIGHT SIDE VIEW WINE W OPENING WIDTH FRONT VIEW NOTE: Shaded line represents profile of unit. OPENING WIDTH W WS-30 29 1/2" (749) BW-30 29 1/2" (749) If an 83" (2108) grille height is specified, the opening height must be decreased by 7/8" (22).
PAGE 65
W INE S T O R AG E B U I L T- I N Opening Dimensions M ODEL WS -30 | BW-30 FL USH INSE T INSTA LLATI O N 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) PRO 48 FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) I N T E G R AT E D W 84" (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW WINE *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
PAGE 66
B U I L T- I N W INE S T O R AG E Opening Dimensions M ODEL WS -30 | BW-30 DUAL STANDARD IN S TALLATI O N PRO 48 24" (610) OPENING DEPTH I N T E G R AT E D TOP VIEW (2127) OPENING HEIGHT WINE SIDE VIEW OPENING WIDTH FRONT VIEW NOTE: Shaded line represents profile of unit.
PAGE 67
W INE S T O R AG E B U I L T- I N Opening Dimensions M ODEL WS -30 | BW-30 DUAL FL USH INSE T I N S TA LLATI O N 26 3/16" (665) FLUSH INSET DEPTH 2 3/16" (56) PRO 48 FINISHED CLEATS* TOP VIEW 11/4" 1/4" (6) (32) I N T E G R AT E D W 84" (2134) FLUSH INSET HEIGHT FLUSH INSET WIDTH 11/4" (32) 4" (102) 3" (76)* TYPICAL SIDE VIEW 2 3/16" (56) FRONT VIEW WINE *3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
PAGE 68
B U I L T- I N W INE S T O R AG E Electrical PRO 48 The electrical supply must be located within the shaded area shown in the illustration for your specific model. For integrated (IW) models, also refer to the chart. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
PAGE 69
W INE S T O R AG E B U I L T- I N Custom Panels Custom Panel—424G | UW-24 For framed, overlay, integrated and flush inset applications, a custom door panel must be provided. Handle hardware must also be provided for overlay, integrated and flush inset applications. Refer to panel requirements and custom panel dimensions charts for your specific model and design application.
PAGE 70
B U I L T- I N W INE S T O R AG E Custom Panel—Integrated For integrated (IW) models, a custom door panel and handle hardware must be provided. Refer to the panel requirements chart and typical panel dimensions. PRO 48 Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer. The thickness of the custom panel can vary.
PAGE 71
W INE S T O R AG E B U I L T- I N Custom Panel—Integrated D U AL I N S TALLATI O N T Y PICAL PANEL DIME NSIONS For dual installations, refer to the illustration for panel height and the chart below for panel width.
PAGE 72
B U I L T- I N W INE S T O R AG E Custom Panel—Integrated TO E K I C K C LEAR A N C E The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
PAGE 73
W INE S T O R AG E B U I L T- I N Custom Panel—WS-30 | BW-30 F R AMED FR AM ED PAN EL D I M EN S I O N S The framed application is an overlay model with framed design features. It is not a separate model. H A 1/4" Routing, recessing and optional extended handles may be required for finger clearance. Refer to the full-scale template on page 82. A A H PRO 48 (6), a filler material If the custom panel is thinner than must be added to achieve a proper fit.
PAGE 74
B U I L T- I N W INE S T O R AG E Custom Panel—WS-30 | BW-30 O VER LAY O VER LAY PA N EL D I MEN S I O N S Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations below.
PAGE 75
W INE S T O R AG E B U I L T- I N Custom Panel—WS-30 | BW-30 F LUS H INS ET FLU S H I N S ET PA N EL D I MEN S I O N S The flush inset application is an overlay model with flush inset panels. It is not a separate model. H A A For flush inset panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale template on page 85.
PAGE 76
5/16" (8) B U I L T- I N W INE S T O R AG E 5/8" (16) TOP VIEW TOP VIEW CABINETRY DOOR / DRAWER / GRILLE 1/2" (13) BACKER 1/8" 5/16" (3) (8) CABINETRY GRILLE The illustrations provide offsets and reveals for model FLUSHpanel INSET PANEL WS-30 or BW-30 in a flush inset application. Refer to the 5/16" (8) 1/2" chart below for reference to the illustrations.
PAGE 77
W INE S T O R AG E B U I L T- I N Custom Panel—WS-30 | BW-30 D U AL FLU S H I N S ET PA N EL D I MEN S I O N S D U AL INS TALLATIONS Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For questions regarding the installation, call Sub‑Zero customer care at 800-222-7820.
PAGE 78
W INE S T O R AG E TOP VIEW TOP VIEW B U I L T- I N DOOR / DRAWER / GRILLE BACKER SPACER DOOR CABINETRY TOP VIEW 5/16" (8) Custom Panel—WS-30 | BW-30 1/2" 5/8" (13) D U AL F LUS H IN SE T PANE L OFFSE T (16) 1/8" (3) BACKER SPACER BACKER CABINETRY SPACER IL L U S Door (hinge) | Grille Sides A Door (handle) Sides B Grille Top CABINETRY CABINETRY TOP VIEWREVEAL BACKER GRILLE 1/8" 5/16" (3) (8) E 5/8" (16) 5/16" (8) 5/8" (16) GRILLE Illus.
PAGE 79
W INE S T O R AG E B U I L T- I N Custom Panel—WS-30 | BW-30 Standard Handles S I DE PANEL Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. The custom side panel must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below.
PAGE 80
B U I L T- I N W INE S T O R AG E Wine Rack Wood Facing F ULL-S CALE T E MPL ATE WOOD FACING WIDTH PRO 48 The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for profile dimensions of the wood facing and the chart for width.
PAGE 81
W INE S T O R AG E B U I L T- I N Door Clearance—424G | UW-24 F ULL-S CALE T E MPL ATE To allow for a 145° door opening, the unit should extend a minimum of 1/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
PAGE 82
B U I L T- I N W INE S T O R AG E Framed Panel—WS-30 | BW-30 PRO 48 F ULL-S CALE T E MPL ATE OPTIONAL EXTENDED FULL-LENGTH HANDLE I N T E G R AT E D STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL WINE 1/4" (6) FRAMED PANEL DOOR UNDERCOUNTER Framed panel thickness. 82 | Sub-Zero Customer Care 800.222.
PAGE 83
W INE S T O R AG E B U I L T- I N Overlay | Flush Inset Panels—WS-30 | BW-30 F ULL-S CALE T E MPL ATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. PRO 48 DEPTH OF TUBULAR AND PRO HANDLES 2" (51) 3" I N T E G R AT E D 1" (25) (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .
PAGE 84
B U I L T- I N W INE S T O R AG E Overlay Application—WS-30 | BW-30 F ULL-S CALE T E MPL ATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT PRO 48 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) I N T E G R AT E D 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) WINE 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) UNDERCOUNTER 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view).
PAGE 85
W INE S T O R AG E B U I L T- I N Flush Inset Application—WS-30 | BW-30 F ULL-S CALE T E MPL ATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) PRO 48 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS I N T E G R AT E D WINE 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER 0" 1" (25) SCALE 110° door opening (top view). subzero.
PAGE 86
B U I L T- I N W INE S T O R AG E PRO 48 FILLER STRIP 11/4" (32) DOOR CLOSED Dual Standard Installation—WS-30 | BW-30 DOOR OPEN 110° WINE I N T E G R AT E D APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE F ULL-S CALE T E MPL ATE UNDERCOUNTER Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view).
PAGE 87
W INE S T O R AG E B U I L T- I N FILLER STRIP PRO 48 1 1/2" (38) 1/2" (13) WINE Dual Flush Inset Installation—WS-30 | BW-30 DOOR CLOSED I N T E G R AT E D PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE DOOR OPEN 110° F ULL-S CALE T E MPL ATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 1" (25) SCALE Dual flush inset installation (top view). subzero.
PAGE 88
PAGE 89
U N DER CO UNT E R RE FRIGE RATION B U I L T- I N Undercounter Refrigeration U N D ER C O U N TER MO D ELS UC-24R UC-24BG UC-24C(I) PRO 48 Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, home office or media room. In the kitchen, a high-volume ice machine is a must for entertaining. The design flexibility of these compact yet roomy units makes them all the more welcome in any room or outdoor kitchen.
PAGE 90
B U I L T- I N U N DER CO UNT E R RE FRIGE RATION Overall Dimensions U N DER CO UNT E R I C E MAC H I N E 23 7/8" (606) 14 3/4" (375) 24" (610) 33 5/8" 34" PRO 48 23" (584) (854) (864) 4" (102) I N T E G R AT E D 4" (102) 18" (457) 25 3/8" (645) 6" (152) 26" (660) 8" (203) SPECIFICATIONS WINE I NT E R I O R C A PA C I T Y—CU FT (L ) UC-24R, UC-24RO UC-24BG UC-24C(I) SPECIFICATIONS RE FR 5.7 (161) 6.0 (170) 3.6 (102) 1.
PAGE 91
U N DER CO UNT E R RE FRIGE RATION B U I L T- I N Opening Dimensions DUAL INSTALLATION U N DER CO UNT E R 24" (610) OPENING DEPTH TOP VIEW Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For questions regarding the installation, call Sub‑Zero customer care at 800-222-7820.
PAGE 92
B U I L T- I N U N DER CO UNT E R RE FRIGE RATION Electrical PRO 48 The electrical supply should be located within the shaded area shown in the illustration. For ice machine models, it is recommended that electrical supply be placed in an adjacent cabinet. A separate circuit, servicing only this appliance is required. IMPORTANT NOTE: For outdoor models UC-24RO and UC-15I(P)O, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock.
PAGE 93
U N DER CO UNT E R RE FRIGE RATION B U I L T- I N Plumbing IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure as indicated in the chart below at all times. A copper line is not recommended for this application. ICE MACHINE DRAIN Ice machine models can be ordered with or without a drain pump. Models without a pump will drain water by gravity. A drain must be installed. The drain and inlet water tubes must be plumbed before connecting to the ice machine.
PAGE 94
B U I L T- I N U N DER CO UNT E R RE FRIGE RATION Custom Panel For overlay undercounter models, custom door panels and handle hardware must be provided. Refer to the charts for panel requirements and dimensions. PRO 48 Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
PAGE 95
U N DER CO UNT E R RE FRIGE RATION B U I L T- I N Custom Panel Standard Handles O VER LAY PANEL DIME NSIONS Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. A H A A H Refer to the chart below for standard handle lengths for undercounter models.
PAGE 96
B U I L T- I N U N DER CO UNT E R RE FRIGE RATION Wine Rack Wood Facing F ULL-S CALE T E MPL ATE WOOD FACING WIDTH UC-24BG UC-24C(I) 19 1/2" (495) (495) PRO 48 The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale template below for profile dimensions of the wood facing and the chart for widths.
PAGE 97
U N DER CO UNT E R RE FRIGE RATION B U I L T- I N Door Clearance—Undercounter F ULL-S CALE T E MPL ATE To allow for a 145° door opening, the unit should extend a minimum of 1/4" (6) beyond the front surface of adjacent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
PAGE 98
Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc.
PAGE 99
Sub-Zero Outdoor Limited Warranty* FOR RESIDENTIAL USE FULL ONE YEAR WARRANTY** For one year from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc.
PAGE 100
SUBZERO.