INSTALLATION GUIDE Convection Steam Oven
Contents Important Note Wolf Convection Steam Oven . . . . . . . . . . . . . . . . . . . 3 To ensure the safe and efficient use of Wolf equipment, please take note of the following types of highlighted information throughout this guide: Convection Steam Oven Specifications . . . . . . . . . . . 4 Convection Steam Oven Installation . . . . . . . . . . . . . 12 Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wolf Convection Steam Oven 3 wolfappliance.com/specs Convection Steam Oven Installation IMPORTANT NOTE: This installation must be completed by a qualified installer or Wolf authorized service center technician. Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference.
Convection Steam Oven Specifications 4 Overall Dimensions CONVECTION STEAM OVEN Model CSO24 21 3/16" 1" (25) (538) 23 1/2" (597) 29 7/8" (759) WITH TRIM FRONT VIEW 17 7/8" 21 9/16" (454) (548) 2 13/16" (71) 21 9/16" (548) BEHIND FRAME SIDE VIEW OVEN DOOR OPEN (TOP VIEW) 14 3/16" (360)
Convection Steam Oven Specifications 5 wolfappliance.com/specs Convection Steam Oven The convection steam oven can be installed with or without side trim in a standard or flush inset application. The installation opening must have a flat, level base to support the oven. A minimum base support of 100 lbs (45 kg) is required. The electrical supply for the oven must be located in an adjacent cabinet.
Convection Steam Oven Specifications 6 Electrical Requirements IMPORTANT NOTE: Unless you are using cabinets deeper than 24" (610) for a standard installation or 25" (635) for a flush inset installation, the electrical supply for the convection steam oven must be placed in an adjacent cabinet within reach of the 6' (1.8 m) power cord. Choose the electrical location shown in the illustrations on the following pages that best suits your installation.
Convection Steam Oven Specifications 7 wolfappliance.com/specs Standard Installation CONVECTION STEAM OVEN E 21 9/16" (548) min OPENING DEPTH 17 11/16" (449) OPENING HEIGHT SIDE VIEW NOTES: Minimum base support 100 lbs (45 kg). Electrical supply must be located in adjacent cabinet within 3' (.9 m) of opening. Dashed line represents profile of unit.
Convection Steam Oven Specifications 8 Flush Inset Installation CONVECTION STEAM OVEN TOP VIEW 1" (25) 23" (584) min FLUSH INSET DEPTH SIDE CLEATS 30 1/8" (765) min FLUSH INSET WIDTH E E 5/16" (8) TOP CLEAT 17 11/16" (449) OPENING HEIGHT 18 1/8" (460) min FLUSH INSET HEIGHT SIDE VIEW NOTES: Minimum base support 100 lbs (45 kg). Electrical supply must be located in adjacent cabinet within 3' (.9 m) of opening. Cleats may be visible and should be finished to match cabinetry.
Convection Steam Oven Specifications 9 wolfappliance.com/specs Standard Installation CONVECTION STEAM OVEN AND L SERIES OVEN E 21 9/16" (548) min OPENING DEPTH 17 11/16" (449) OPENING HEIGHT E 22 1/4" (565) STEAM OVEN OPENING WIDTH 3/16" (5) min 24" (610) min OPENING DEPTH 27 3/16" (691) OPENING HEIGHT 28 1/2" (724) L SERIES OVEN OPENING WIDTH 4" (102) 5" (127) SIDE VIEW FRONT VIEW NOTES: Minimum base support for steam oven 100 lbs (45 kg) and L series oven 250 lbs (113 kg).
Convection Steam Oven Specifications 10 Standard Installation CONVECTION STEAM OVEN AND E SERIES OVEN E 21 9/16" (548) min OPENING DEPTH 17 11/16" (449) OPENING HEIGHT E 22 1/4" (565) STEAM OVEN OPENING WIDTH 5/8" (16) min 24" (610) min OPENING DEPTH 27 3/16" (691) OPENING HEIGHT 28 1/2" (724) E SERIES OVEN OPENING WIDTH 4" (102) 5" (127) SIDE VIEW FRONT VIEW NOTES: Minimum base support for steam oven 100 lbs (45 kg) and E series oven 250 lbs (113 kg).
Convection Steam Oven Specifications 11 wolfappliance.
Convection Steam Oven Installation 12 Install the Oven WITHOUT TRIM IMPORTANT NOTE: Before moving the oven, protect any finished flooring and cabinetry to avoid damage. 1) Move the convection steam oven into position near the installation opening. Remove and discard packing materials. 2) Carefully place the oven in the opening. Resting the oven on the cabinet base support, slide the unit into the opening until it is approximately 6" (152) from being fully installed.
Convection Steam Oven Installation 13 wolfappliance.com/specs Install the Oven WITH TRIM IMPORTANT NOTE: Trim kits are an optional sales accessory and not required to install the convection steam oven. Depending on the trim kit you have purchased, trim panels may look slightly different than shown in the illustrations. Not all parts provided with the trim kit will be used for installation with the convection steam oven.
Convection Steam Oven Installation 14 Verify Oven Operation Troubleshooting Before operating the convection steam oven, be sure to read the entire use & care guide included with the oven for important safety, operating and warranty information. IMPORTANT NOTE: If the convection steam oven does not operate properly, follow these troubleshooting steps: Turn on the electrical supply to the oven.
Service Information 15 wolfappliance.com/specs Service Information If service is necessary, maintain the quality built into your convection steam oven by contacting Wolf factory certified service. RATING PLATE WATER LIGHT TEMP MODE ON POWER TIME OFF For the name and number of Wolf factory certified service nearest you, check the contact & support section of our website, wolfappliance.com or call Wolf customer care at 800-222-7820.
WOLF APPLIANCE, INC. P. O. BOX 44848 MADISON, WI 53744 821230 REV-A 8/ 2012 WOLFAPPLIANCE.COM 800.222.
