E LECTRIC C OOKTOPS I NSTALLATION I NSTRUCTIONS
As you follow these instructions, you will notice WARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equipment. There are two types of potential hazards that may occur during installation. signals a situation where minor injury or product damage may occur if you do not follow instructions. states a hazard that may cause serious injury or death if precautions are not followed.
W O L F E L E C T R I C C O O K TO P S I N S TA L L AT I O N R E Q U I R E M E N T S IMPORTANT NOTE: Save these Installation Instructions for the local inspector’s use. Please read the entire Installation Instructions prior to installation. This installation must be completed by a qualified technician. Installer: please retain these instructions for local inspector’s reference, then leave them with the homeowner.
W O L F E L E C T R I C C O O K TO P S S I T E P R E PA R AT I O N IMPORTANT NOTE: Installation of the Wolf electric cooktop must meet the following location requirements. All dimensions listed are minimum requirements for safe operation. To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided.
I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N S P E C I F I C A T I O N S F R A M E D MODEL CT15E Wolf electric cooktops are designed to fit a standard 24" (610) deep base cabinet with a 25" (635) deep countertop. Before making the countertop cut-out, verify that the cooktop will clear the side walls of the base cabinet below. The illustrations below provide the overall dimensions, installation specifications and countertop cut-out for Model CT15E.
W O L F E L E C T R I C C O O K TO P S F R A M E D MODEL CT30E The illustrations below provide the overall dimensions, installation specifications and countertop cut-out for Model CT30E. For ease of installation, 33" (838) cabinets are recommended for installation of Model CT30E. A Wolf 30" (762) or 36" (914) built-in single oven may be installed below Model CT30E.
I N S TA L L AT I O N I N S T R U C T I O N S F R A M E D MODEL CT36E If Model CT36E is installed above cabinets, the electrical placement is not critical. A grounded electrical box should be located within 4' (1.2 m) of the right rear of the cooktop. The illustrations below provide the overall dimensions, installation specifications and countertop cut-out for Model CT36E. For ease of installation, 39" (991) cabinets are recommended for installation of Model CT36E.
W O L F E L E C T R I C C O O K TO P S U N F R A M E D MODEL CT30EU If Model CT30EU is installed above cabinets, electrical placement is not critical. A grounded electrical box should be located within 4' (1.2 m) of the right rear of the cooktop. The illustrations below provide the overall dimensions, installation specifications and countertop cut-out for Model CT30EU. For ease of installation, 33" (838) cabinets are recommended for installation of Model CT30EU.
I N S TA L L AT I O N I N S T R U C T I O N S U N F R A M E D MODEL CT36EU The illustrations below provide the overall dimensions, installation specifications and countertop cut-out for Model CT36EU. For ease of installation, 39" (991) cabinets are recommended for installation of Model CT36EU. A Wolf 36" (914) built-in single may be installed below Model CT36EU.
W O L F E L E C T R I C C O O K TO P S U N F R A M E D I N S TA L L A T I O N S F L U S H M O U N T I N S TA L L AT I O N Flush mount installations are intended for granite, solid surface or stone countertop surfaces only. Failure to use high heat resistant surface will result in countertop damage if hot cooking utensils are accidentally moved off the cooking surface.
I N S TA L L AT I O N I N S T R U C T I O N S U N F R A M E D I N S TA L L A T I O N S F L U S H M O U N T I N S TA L L A T I O N F R A M E L E S S I N S TA L L AT I O N OPTION 2: For this flush mount installation, the countertop cut-out will be the same size as the outer edge of the glass top. It is recommended that cooktop itself be used as the template for the cut-out. Turn the cooktop over and mark the opening using the glass top as a template.
W O L F E L E C T R I C C O O K TO P S ACCESSORIES Optional accessories are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com.
I N S TA L L AT I O N I N S T R U C T I O N S ELECTRICAL R E Q U I R E M E N T S Verify that power is disconnected from the electrical box before proceeding.
W O L F E L E C T R I C C O O K TO P S C O O K T O P I N S TA L L AT I O N B E F O R E O P E R AT I N G T H E C O O K T O P Attach the foam strip to the underside of the cooktop frame. Refer to the illustration below. Clean the glass ceramic surface carefully using the Cooktop Cleaning Crème provided with the cooktop. Remove all cleaning residue. IMPORTANT NOTE: For frameless installations, adhere the foam strip to the outer edge of the glass, not the support frame.
I N S TA L L AT I O N I N S T R U C T I O N S TROUBLES H O OT I N G I F C O O K T O P D O E S N O T O P E R AT E IMPORTANT NOTE: If the electric cooktop does not operate properly, follow these troubleshooting steps: Verify that power is being supplied to the cooktop. Check electrical connections to ensure that the installation has been completed correctly. Follow troubleshooting procedures as described in the Wolf Electric Cooktops Use & Care Information.
W O L F A P P L I A N C E C O M PA N Y, L L C 807606 10 / 2005 P. O. B OX 4 4 8 4 8 MADISON, WI 53744 800-332-9513 W O L FA P P L I A N C E .
