User Guide

10
INSTALL THE RANGETOP
Prepare the finished rough opening for the
rangetop according to the Installation Specifi-
c
ations illustration for your model on pages
8–9. The platform must be
3
/4" (19) thick and
include a cut-out at the back for gas supply
a
nd electrical connections.
I
MPORTANT NOTE:
T
he platform must be
level to ensure that the cooking surface is
level.
Remove and discard all packing materials,
including cardboard and tape on the outside of
the rangetop. Remove burner grates from the
cooking surface.
If your installation requires a riser, it must be
attached to the rangetop before installation.
Refer to the installation instructions packaged
with the riser.
Position the rangetop on the platform. Gas
supply and electrical connections should be
made before the rangetop is placed in its final
position.
WOLF GAS RANGETOPS
GAS SUPPLY REQUIREMENTS
TYPES OF GAS
T
here are two types of gas, natural and liquid
propane (LP). Conversions are required in
order for appliances designed for one gas to be
o
perated with the other gas. Such conversions
must be performed by a Wolf authorized
service center. Make sure your Wolf gas
rangetop is correctly adjusted for the type of
gas being used.
The product rating plate has information on the
type of gas that should be used. The rating
plate is located under the drip pan that
supports the cooking grates, on the left inside
wall of the rangetop. The rating plate for
French Top models (except Model RT484F) is
located on the right inside wall. If this informa-
tion does not agree with the type of gas
available, contact your Wolf dealer. To obtain
local dealer information, visit the Locator
section of our website, wolfappliance.com.