User Guide

BURNER ASSEMBLY
A
fter cleaning or removing burner parts for
any reason, it is extremely important that you
reassemble the burners correctly. The outer
b
urner ring and center burner cap do not have
a special orientation, but must be seated flat.
10
SURFACE BURNERS
A spark electrode ignites each surface burner.
T
his control eliminates the need for continuous
open flame pilots. For added safety and
convenience, each burner is designed with an
e
lectronic reignition system. This feature
enables any burner to relight automatically in
the event it is accidentally extinguished.
Each surface burner provides a rating of 16,000
Btu/hr (4.7 kW) on
HIGH with 500 Btu/hr
(.1 kW) delivered at simmer.
In case of a power outage, you can relight the
surface burners manually. Turn the control
knob to
HIGH , then use a minimum 6" (152)
igniter to manually light the burner.
WOLF GAS RANGETOP OPERATION
Failure to position the burner parts
correctly could cause flames or gas to
escape and burn between parts, resulting
in poor combustion or damage to your
gas rangetop.
Manually relight each bur
ner individually
.
Do not try to manually relight the French
Top, charbr
oiler or griddle.
Center Cap
Porcelain To pOuter Burner
Ring
Igniter
Drip Pan
Upper bur
ner parts and alignment
Center CapIgniter
Burner Base
Cross
Ring
Base burner parts and alignmentManually relighting the burner