Design Guide

60 | Sub-Zero Customer Care 800.222.7820
Wine Storage
Opening Dimensions
DESIGNER WINE STORAGE
OPENING DIMENSIONS W*
18" Column 18" (457)
24" Column 24" (610)
30" Column / Tall 30" (762)
*For stainless steel side panel accessory, add 1" (25) per panel to
opening width.
The depth of each Designer (IW) model is 24" (610). Allow
for panel thickness when planning the finished open-
ing depth. A minimum 3⁄"
(89) finished return is required
on all sides of the opening. Framed cabinets will require
additional finished filler material behind the face frame for
a proper installation. Refer to the illustration.
DUAL INSTALLATION
The unit can be installed next to an Designer refrigera-
tion model or another Designer wine storage model in a
dual installation. When installing two units side by side,
the opening width is the width of the two units added
together. A dual installation kit is required for this installa-
tion. If a dual installation kit is not specified, a minimum
2"
(51) filler strip is required between the units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the
find a showroom section of our website, subzero.com.
For questions regarding the installation, call Sub-Zero
Customer Care at 800-222-7820.
W
OPENING WIDTH
84"
(2134)
OPENING
HEIGHT
NOTE:
3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry.
SIDE
VIEW
TOP VIEW
FRONT VIEW
3
/4" (19)
TYPICAL
FRAMED
CABINETRY
W
FILLER
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS
CABINETRY
W
3
/4" (19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
25" (635)
OPENING
DEPTH