Design Guide

subzero.com | 71

3" (76)

6" (152)

RIGHT SIDE

OF OPENING

AREA EXTENDS

/2" (13)

FORWARD ON FLOOR

Water supply location

Wine Storage

Plumbing Requirements

MODEL IW-30CI

For model IW-30CI, locate the water supply line within the

shaded area shown in the illustration below. Connect the

water supply line to the house supply with an easily acces-

sible shut-o valve. Do not use self-piercing valves. The

water supply line must not interfere with installation of the

anti-tip bracket.

A reverse osmosis system can be used provided there is

constant water pressure of 35–120 psi

(2.4–8.3 bar) supplied

to the unit at all times. A copper line is not recommended

for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply ⁄" OD copper, braided stainless

steel, or PEX tubing

Pressure 35–120 psi (2.4–8.3 bar)

Excess Line for Connection 36" (914)

WATER SUPPLY LOCATION A

IW-30CI 6" (152)